Handling Of Cable - Hondex HDX-121 Operation Manual

CAUTION
Do NOT install the unit where rain or spray dashes hit directly.
It causes the firing and electric shock.
Do NOT install the unit at heated places.
It causes the firing from the increase of internal temperature,
injury, and electric shock.
Use the earthing.
Noise influence can be prevented by firm earthing.
Away from direct sun light.
It causes the difficulty of future vision and heat problem.

2. HANDLING OF CABLE

WARNING
Be sure to use the specified power supply cable.
It causes firing and heating.
Do NOT leave the power plug after its removal.
It causes firing and heating if the plug gets wet.
Be sure to wire the cables for safety pilot.
The improper wiring causes the accident.
Do NOT put the heavy object on cables or bend cables
excessively.
Do NOT disassemble or modify the cables.
It causes firing, heating, or electronic shock.
Do NOT use damaged cables.
It causes firing or electric shock.
CAUTION
Do NOT pull out the cable when disconnecting the plug.
The cable damage causes firing and electric shock.
Be sure to hold and pull the plug itself for the removal.
Do NOT put any pressure on cables when installing the unit.
It causes line cut and shortage.
2