Recall Saved Route (Route Navigation) - Hondex HDX-121 Operation Manual

RECALL SAVED ROUTE (ROUTE NAVIGATION)

Recall Route (Start Route Navigation)
SET key
Waypioint line
Own boat
Starting point
Alarm Marker
Note) The following conditions need to be met for route navigation.
Route is pre-set.
Lat/Long of own vessel is shown on the screen.
Route navigation is cancelled after power OFF.
1
Go to 4.ROUTE – 1.RECALL ROUTE.
2
Input the route number.
3
Press set key to set the route navigation.
Route Navigation
It always sets to next passing point
automatically every time the vessel reach
a passing point.
Route Navigation Display
1 When recalling a route, setting the
Recalled route
2 When a vessel reaches inside alarm
Waypoint line
Own boat
3 This action is repeated until the
55
closest passing point (either
starting or end point) as the
starting point #1 for this case. At
the same time, put a line between
own vessel and next passing
point#1.
marker of #2, put a line between
own vessel and passing point#3.
vessel reaches to the end point.