Usb Device - Hondex HDX-121 Operation Manual

USB DEVICE

Possible to copy the data between unit and USB device.
Any USB devices up to 8GB specs
Copy Data Contents Wake, Mark, Waypoint, Line, Route
It may take sometimes to recognize the connected USB device.
Software may act slow when USB device is connected.
Save Data from Unit to USB Device
CLR key
NUMBER key
NUMBER key
1
SET key
Go to 8.OTHERS – 2.MEMORY CARD –
2.STORE FROM UNIT TO USB-DRIVE.
2
Input the block number of USB device and
press SET key.
CENTER key
3
Use DIRECTION key to select the item to
be saved.
4
If USB device contains some data, select
either overwrite or cancel.
Red-colored block number means some
data contained.
Red-colored block number means some
data contained inside USB device.
Overwriting erases the old data.
28