MAIN UNIT INSTALLATION
WARNING
Install the unit firmly.
If not, it may cause the human injuries.
Install the unit correctly according to the following instruction.
CAUTION
Do NOT install the unit where rain or spray dashes hit directly.
It causes the firing and electric shock.
Procedure of Installation
Installation of Unit
Fix the unit with enclosed screws by using bracket holes (4 locations).
Refer to the picture below.
1
Positioning
Fix the unit with mounting bracket and fixation spot. Put the mark.
Leave some room in the backside of unit for cable connections.
2
Installation of Bracket
Fix it with enclosed screws by using 4 holes on the bracket.
3
Installation of Unit
Refer to the picture below and fix the unit.
(HDX-121 / HDX-122)
Main Unit
111
Screw
5×20 SUS(4pcs)
Rubber Ring
Rubber Washer
Clamping Knob