Draw Line - Hondex HDX-121 Operation Manual

DRAW LINE

Draw Line

Line
Possible to draw desired lines.
Max.8,000 points
CURSOR ON/OFF key
CLR key
Distance between 2 Points
The distance between 2 points can be checked at the bottom when
drawing the line.
Line Color
Go to 8.OTHERS – 1.DRAW LINE – 2.LINE COLOR.
1
Press CURSOR key to display a cursor.
2
Go to 8.OTHERS – 1.DRAW LINE –
1.START DRAW. Press SET key.
3
Move a cursor to the starting point and
press SET key.
4
Use DIRECTION key to move the cursor
SET key
to the next point and press SET key.
5
Repeat step4 above to create more lines.
6
CENTER
Press CLR key to end.
key
Case of Remote
1
Press CURSOR key to display a cursor.
2
Move the cursor to the starting point and
press LINE key.
3
Use DIRECTION key to move the cursor
to the next point and press LINE key.
4
Repeat step3 above to create more lines.
5
Press CLR key to end.
51
option