Cursor - Hondex HDX-121 Operation Manual

CURSOR

On/Off Cursor
CURSOR ON/OFF key
MOVE CURSOR
CURSOR ON/OFF key
DIRECTION key (CENTER key)
Memo) DIRECTION key moves either the cursor (when the cursor is ON)
or chart display (when there is no cursor on the screen).
Use of Cursor
Display the selected Lat/Long.
Display distance/bearing/time from own
vessel to cursor.
Input/Erase mark or waypoint.
1
Press CURSOR ON/OFF key to show the
cursor. Press one more time to cancel.
Cursor Line
"Cursor Line" is the line between own
vessel to cursor.
No indication of cursor
line/bearing/time when the location of
own vessel is not shown on the screen.
1
Select CURSOR ON/OFF key to show the

cursor.

2
Use DIRECTION key to move the cursor.
CENTER key
Case of Remote
Centering key is located at the center of
When cursor is ON
Cursor location becomes the center.
When no cursor is ON
Own vessel location becomes the
center.
option
DIRECTION key.
23