Table of Contents
Advertisement
WAYPOINT NAVIGATION
Set-up Waypoint Navigation
WP RECALL key
NUMBER
key
Note) The following conditions are required for setting waypoint navigation.
Lat/Long of own vessel is shown on the screen.
Waypoint is pre-set.
Waypoint navigation shows line from own
vessel to the waypoint. On the upper left
screen, you may see waypoint's lat/long
and distance/time between waypoint and
own vessel.
1
Press WP RECALL key. Or, go to
2.WAYPOINT – 1.RECALL WAYPOINT.
2
Use NUMBER key to input the number.
NUMBER
Possible to use a cursor instead of
key
number input.
3
Press SET key to set.
Correct time may not appear when the
time is 100hrs or over.
49
Advertisement
Table of Contents
