System Status; Radio Status - Aruba AP-303H Series Installation Manual

Figure 1

System Status

The System Status LED indicates the operating condition of the access point, as shown in
Table 1 System Status LEDs
Color/State
Off
Green/solid
Green/blinking
Green/flashing
Amber/solid
Amber/flashing
Red/solid
1 blinking: 1s on/1s off
2 flashing: on/off repeated in less than 1s

Radio Status

The Radio Status LED indicates the operating mode of the access point's radios, as shown in
2
Front
Meaning
Device is powered off
Device is ready; fully functional
Device is booting; not ready
1
Device is ready; uplink negotiated at suboptimal speed (<1Gbps)
2
Device is ready; operating in power-save mode
(PoE source: 802.3af).
Device is ready; operating in power-save mode, with uplink negotiated at
suboptimal speed (<1Gbps)
Error condition
PoE-PSE Status
Radio Status
System Status
Aruba 303H Series Hospitality Access Point | Installation Guide
Table 1.
Table 2.