System Status; Radio Status - Aruba IAP-303H Installation Manual

LED
The LED displays located on the front and bottom of the access point indicate the following functions:

System Status

The System Status LED indicates the operating condition of the access point, as shown in
Table 1 System Status LED
Color/State
Off
Green/solid
Green/blinking
Green/flashing
Amber/solid
Amber/flashing
Red/solid
1 blinking: 1s on/1s off
2 flashing: on/off repeated in less than 1s

Radio Status

The Radio Status LED indicates the operating mode of the access point's radios, as shown in
Table 2 Radio Status LED
Color/State
Off
Green/solid
Green/blinking
Amber/solid
Amber/flashing
Alternating
2
Meaning
Device is powered off
Device is ready; fully functional
Device is booting; not ready
1
Device is ready; uplink negotiated at suboptimal speed (<1Gbps)
2
Device is ready; operating in power-save mode (PoE source: 802.3af).
Device is ready; operating in power-save mode, with uplink negotiated at
suboptimal speed (<1Gbps)
Error condition
Meaning
Meets one of the following conditions:
both radios are disabled

device is powered off

Both radios enabled in access mode
One radio enabled in access mode; one radio
1
disabled
Both radios enabled in monitor mode
Device ready; operating in power-save mode, with uplink negotiated at
suboptimal speed (<1Gbps)
3
Error condition
Aruba 303H Series Hospitality Access Points | Installation Guide
Table 1.
Table 2.