System Status - Aruba 203R Series Installation Manual

LED
The LED displays located on the front panel of the access point indicate the following functions:

System Status

The System Status LED indicates the operating condition of the access point, See
Table 1 System Status LED
Color/State
Off
Green/solid
Green/blinking
Green/flashing
Red/solid
1 Blinking: one second on/one second off.
2 Flashing: on/off repeated in less than 1s
Radio Status
The Radio Status LED indicates the operating mode of the access point's radios. See
Table 2 Radio Status LED
Color/State
Off
Green/solid
Green/blinking
Amber/solid
Amber/blinking
Alternating
3 Alternating: light cycles alternate between green/amber; one second on/one second off.
2
Meaning
Device is powered off
Device is ready; fully functional
Device is booting; not ready
1
Device is ready; uplink negotiated at suboptimal speed (<1Gbps)
2
Error condition
Meaning
Meets one of the following conditions:
Device is powered off

both radios are disabled

device is powered off

Both radios enabled in access mode
One radio enabled in access mode; one radio disabled
Both radios enabled in monitor mode
One radio enabled in monitor mode; one radio disabled
3
One radio enabled in access mode; one radio in monitor mode
Table
Aruba 203R Series Wireless Access Points | Installation Guide
1.
Table 2.