System Status - Aruba AP-203R Installation Manual

LED
The LED displays located on the front panel of the access point indicate the following functions:

System Status

The System Status LED indicates the operating condition of the access point, See .
Table 1 System Status LEDs
Color/State
Off
Green/solid
Green/blinking
Green/flashing
Red/solid
1 blinking: 1s on/1s off
2 flashing: on/off repeated in less than 1s
Radio Status
The Radio Status LED indicates the operating mode of the access point's radios. See
Table 2 Radio Status LEDs
Color/State
Off
Green/solid
Green/blinking
Amber/solid
Amber/flashing
Alternating
2
Meaning
Device is powered off
Device is ready; fully functional
Device is booting; not ready
1
Device is ready; uplink negotiated at suboptimal speed (<1Gbps)
2
Error condition
Meaning
Meets one of the following conditions:
both radios are disabled

device is powered off

Both radios enabled in access mode
One radio enabled in access mode; one radio disabled
1
Both radios enabled in monitor mode
Device ready; operating in power-save mode, with uplink negotiated at suboptimal
speed (<1Gbps)
3
One radio enabled in access mode; one radio in monitor mode
Aruba 203R Series Wireless Access Point | Installation Guide
Table 2.