Troubleshooting
If the problem persists, contact BW Technologies by Honeywell.
Startup
The detector does not activate.
Detector automatically
deactivates.
Shop for Gas products online at:
Problem
Possible Cause
Depleted batteries
Damaged detector
Automatic deactivation due to
critical low battery.
Lockout on Self-Test Error is
enabled and a sensor(s) has failed
the startup self-test.
Sensor(s) requires calibration.
CanarySense
www.
Solution
Replace alkaline batteries. Refer to Replacing the Alkaline
Batteries on page 22.
Refer to Charging the Rechargeable Battery Pack on page 21.
Contact BW Technologies by Honeywell.
Replace alkaline batteries. Refer to Replacing the Alkaline
Batteries on page 22.
Refer to Charging the Rechargeable Battery Pack on page 21.
Refer to Replacing the Sensors on page 26 and Lockout on
Self-Test Error in the GasAlertQuattro Technical Reference Guide.
Refer to Calibration on page 10.
.com
GasAlertQuattro
Troubleshooting
35
1.888.610.7664