Honeywell GasAlertQuattro Operator's Manual page 19

GasAlertQuattro
Operator's Manual
Low Battery Alarm
• Sequence of 10 rapid sirens and
alternating flashes with 7 seconds
of silence in between (continues
for 15 minutes)
•
• Vibrator alarm pulses
• After 15 minutes of the low battery
alarm sequence, the detector
enters critical battery alarm (see
Critical Battery Alarm below)
Critical Battery Alarm
• Fifteen minutes after low battery
alarm activates, sequence of
10 rapid sirens and alternating
flashes with 1 second of silence in
between (sequence reactivates
seven times)
• Vibrator alarm pulses
• Low Battery Powering Off
displays and the detector
deactivates
16
Shop for Gas products online at:
Alarm Screen
H S ppm CO ppm
2
0.0
20.9
flashes
O % LEL %
2
Low battery
Powering off
CanarySense
www.
Alarm
Confidence/compliance Beep
• One beep every 1-120 seconds
0
(beep frequency is defined with
Confidence/compliance Beep
Interval option)
0
IntelliFlash
(default: one flash every 1 second)
• One flash every 1-120 seconds
(flash frequency is defined with
IntelliFlash Interval option)
Heartbeat
• pulses once every second to
verify detector is operating correctly
Note
If the Low Alarm Acknowledge option is enabled, the
audible alarm can be disabled during a low alarm condition.
The LED and visual alarm indicators remain active until the
alarm condition changes or the detector deactivates. Press
C to acknowledge the low alarm and deactivate the audible
alarm. If the alarm escalates to a high, TWA, or STEL alarm,
the audible alarm reactivates.
.com
Screen
H S ppm CO ppm
2
0.0 0
20.9 0
O % LEL %
2
Note: Confidence/
compliance beep and
IntelliFlash
automatically deactivate
during a low battery
alarm, calibration fail,
bump test fail, self-test
fail, and in an alarm
condition.
1.888.610.7664