Ensure all three batteries are
inserted with the positive end
pointing toward the top of the
Press until the release tab engages. If required, tighten the
retaining screw using 3-4 in. lbs torque.
Shop for Gas products online at:
Before replacing the battery pack, ensure the seal on
the instrument and battery pack is free of debris and
Replace the battery pack by inserting the bottom first,
then lower top into place. Ensure the tab is tucked in
before replacing the battery pack.
WEEE Directive and Battery Directive
Failure to comply with the following battery removal and
disposal instructions may result in battery shorting, battery
leakage, and/or other damage. Ensure a qualified technician
completes the following procedures.
Removal and Disposal of the Alkaline Battery Pack
Only a qualified technician should complete the following
To remove the alkaline batteries, refer to steps #1 to #6 in
Replacing the Alkaline Batteries on page 22.
Removal and Disposal of the Rechargeable Battery Pack
To remove the rechargeable battery pack, refer to steps #1 to
#3 in Replacing the Battery Pack on page 21.
Dispose of the battery pack according local laws.