Removal And Disposal Of The Coin Cell - Honeywell GasAlertQuattro Operator's Manual

Removal and Disposal of the Coin Cell

The detector contains a coin cell to power the real-time clock.
Only a qualified technician should complete the following
procedure.
Item
1
2
3
4
Shop for Gas products online at:
1
2
3
4
Description
Rear machine screws (6)
Rear shell
Front shell and PCB
Coin cell
CanarySense
www.
Removal and Disposal of the Coin Cell
1. Press and hold C to deactivate the detector.
2. If the battery pack has not yet been removed, refer to
Removal and Disposal of the Alkaline Battery Pack
on page 24 or Removal and Disposal of the
Rechargeable Battery Pack on page 24.
3. Remove the six machine screws on the rear shell.
4. Remove the two screws on the main PCB.
5. Remove the main board.
6. The coin cell is connected to the board by four leads.
7. Clip the four leads individually to remove the coin cell.
Do not touch two or more leads when disconnecting the
battery cell.
8. Dispose of the coin cell according to local laws.
.com
GasAlertQuattro
25
1.888.610.7664