Fitting The Controller - DURKOPP ADLER 171 Operating Manual

Set-up
Operating manual 171/173 Version 01.0 - 01/2016
6.8

Fitting the controller

Fig. 39: Fitting the controller
(1) - Strain relief
1. Screw the control (3) onto the 4 screw holders (2) under
the table plate.
2. Clamp the power cable of the control into the strain relief
mechanism (1).
3. Screw the strain relief mechanism (1) under the table plate.
①
(2) - Screw holder
(3) - Control
②
③
61