DURKOPP ADLER 171 Operating Manual page 65

Set-up
Operating manual 171/173 Version 01.0 - 01/2016
Fig. 42: Laying the control panel cable
Cable guide 171
(7) - Cable inlet
Laying the control panel cable
6. Laying the cable behind the rear of the arm cover.
Important: Note the different cable inlets (7) of the 171
and 173.
7. Guide the cable down under the handwheel cover.
8. Feed the cable through the table plate cutout downwards
to the controller.
Important: Lay and secure the cable such that it does
not come into contact with any moving parts.
9. Screw the arm cover including control panel tight.
10. Position the handwheel and handwheel cover and screw tight.
Cable guide 173
⑦
63