CTC Union FS-802GS-8PH Quick Installation Manual

Installation
IFS-802GS-8PH(E) can be mounted on the wall or installed in DIN rail
depending on your installation needs. When installing the wall-mounting
bracket (optional accessory) and DIN rail bracket, be sure to correctly align the
orientation pin.
Figure 9. DIN Rail
IFS-802GS-8PH(E) with DIN Rail bracket have a steel spring in the upper rail
of the bracket. This spring is compressed for mounting and un-mounting by
applying downward force.
Figure 11. Mounting
Application
Figure 13. Ethernet Switch Transmission
Introduction
IFS-802GS-8PH & IFS-802GS-8PHE are unmanaged industrial grade
Fast Ethernet PoE switches that provide stable and reliable Ethernet
transmission. Housed in rugged DIN rail or wall mountable enclosures,
these switches are designed for harsh environments, such as industrial
networking and intelligent transportation systems (ITS) and are also
suitable for many military and utility market applications where
environmental conditions exceed commercial product specifications.
Standard operating temperature range models (-10°C~60°C) and wide
operating temperature range models (-40°C~75°C) fulfill the special
needs of industrial automation applications.
Package List
 IFS-802GS-8PH(E) Device
 Protective caps for SFP slots
 Quick installation guide
 Din rail with screws
 Terminal block
Features
 Redundant dual 48VDC inputs (44~57VDC)
 IP30 rugged metal housing and fanless design
 8-port IEEE802.3at/af PoE output (30W per port)
 Maximum PoE output power budget 240W
 Wide temperature range -40°C~75°C (IFS-802GS-8PHE)
 CE, FCC, EN50121-4 Rail traffic
 Industrial grade EN61000-6-2 EMS and EN61000-6-4 EMI
Specifications
Ethernet Interface
 8 x RJ-45 (shielded) ports
 Speed: 10/100M
 Duplex: Full/Half (Auto-negotiation per IEEE802.3u)
 Auto MDI/MDI-X function
Optical
 2 x SFP slots
 Speed: 1000M
Switch
 Store & Forward Switch
 Supports IEEE802.3x Flow Control
 Switching Fabric: 5.6Gbps non-blocking
 Standards: IEEE802.3, 802.3u, 802.3x, 802.3z
 MAC Table: 8K
 Packet Buffer Size: 1Mbits
www.ctcu.com
Figure 10. Wall Mount
Figure 12. Un-mounting
- 7 -
- 1 -
Quick Installation Guide
IFS-802GS-8PH
IFS-802GS-8PHE
8 x 10/100Base-TX + 2 x 1000Base-X SFP with 8 High Power PoE
Switch (Hardened)
CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
© 2015 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Specifications (cont.)
Power over Ethernet
 8 x PoE-enabled ports, Alternate A Mode
 Support IEEE802.3af 15.4watts PoE per port
 Support IEEE802.3at 30watts PoE+ per port (240W budget)
 Positive (VCC+) pins 1,2; Negative (VCC-) pins 3,6; Data pins 1, 2, 3, 6
Power
 Absolute Input Range: 44~57VDC (50~57VDC input is recommended
for IEEE802.3at 30W applications)
 Support Power Input Reverse Polarity Protection
 Support Dual Power Inputs
 Connector: Removable terminal block
 Consumption:
Input Total Power
Voltage Consumption
48VDC 251W
Mechanical
 Water & Dust Proof: IP30 Protection
 Dimensions: 106mm (D) x 72mm (W) x 152mm (H)
 Mounting: DIN-Rail or Wall Mounting (Optional)
 Weight: 765 g
Environmental
 Operating Temperature : -10°C~60°C (IFS-802GS-8PH), -40°C~75°C
(IFS-802GS-8PHE)
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (non-condensing)
Certifications
 EMC: CE
 EMI (Electromagnetic Interference): FCC, FCC Part 15 Subpart B Class
A, CE EN55022 Class A
 Railway Traffic: EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (Burst) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength:
 Safety: UL60950-1 (Pending)
 Shock: EN60068-2-27
 Freefall: EN60068-2-32
 Vibration: EN60068-2-6

MTBF (MIL-HDBK-217): 635,446 Hours
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
Device Power PoE Power
Consumption Budget
5.2W 240W
300A/m, Criteria A
- 2 -
V1.1