CTC Union FRM220-10/100AS-2 User Manual
  1. Manuals
  2. Brands
  3. CTC Union Manuals
  4. Switch
  5. FRM220-10/100AS-2
  6. User manual
CTC Union FRM220-10/100AS-2 User Manual

CTC Union FRM220-10/100AS-2 User Manual

Oam/ip fast ethernet, media converter/switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FRM220-10/100AS-2
OAM/IP Fast Ethernet
Media Converter/Switch

Advertisement

Table of Contents
loading

Related Manuals for CTC Union FRM220-10/100AS-2

Summary of Contents for CTC Union FRM220-10/100AS-2

  • Page 1 FRM220-10/100AS-2 OAM/IP Fast Ethernet Media Converter/Switch...
  • Page 3 Version 3.1 March 2010 Version 3.2 May 2010 This Manual supports the following models: FRM220-10/100AS-2 : 2x100Base-FX (SFP) + 2x10/100Base-TX FRM220-10/100A : 1x100Base-FX (Fixed) + 2x10/100Base-TX (At time of release, the current firmware version was 3.016.) 2009-2010 CTC Union Technologies Co., LTD.
  • Page 4 CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does CTC Union assume any liability arising out of the application or use of any product and specifically disclaims any and all liability, including without limitation any consequential or incidental damages.

  • Page 5: Table Of Contents

    Table of Contents Chapter 1 Introduction........................7 1.1 Welcome ..........................7 1.2 Product Description........................7 1.3 Features........................... 7 1.4 Specifications........................... 8 1.5 Management Features......................8 1.6 Panel............................9 1.7 Factory Reset Procedure ......................9 Chapter 2 Installation ........................10 2.1 Chassis Options........................10 2.2 Electrical Installation ......................
  • Page 6 Chapter 4 Provisioning Via Web Based Management ..............50 4.1 Introduction ..........................50 4.2 Web Main Page........................50 4.3 System ...........................51 4.3.1 Setup ..........................51 4.3.2 Date & Time ........................51 4.3.3 Alarm Setting........................52 4.4 SNMP.............................52 4.4.1 Manager ..........................52 4.4.2 Trap ..........................53 4.5 Local Unit Configuration......................54 4.5.1 Fiber 1 ..........................54 4.5.2 UTP 3 ..........................55 4.5.3 Device Status and Configuration..................55...

  • Page 7: Chapter 1 Introduction

    Converter/Switch. Through out this document, the two different models of this family will be referred to as FRM220-10/100AS-2 or in an abbreviated form as just 10/100A. If you would like to skip right to the installation of the converter, proceed to Chapter 2.

  • Page 8: Specifications

    65000 hrs (25°C) 1.5 Management Features The FRM220-10/100AS-2 has its own embedded processor which can be used to configure the device for stand-alone operation. When placed in a stand-alone chassis, this device supports a text based Telnet terminal with an easy to use menu system for configuration. The embedded HTTP server provides an easy to use GUI (Graphical User Interface) with any web browser.

  • Page 9: Panel

    FRM220-10/100AS-2 Operation Manual 1.6 Panel 2 x SFP ports, support any 155M transceiver 10/100AS-2 Green: 100M Off: LED Indicators Power Test 1, 2 Link On: Link Flash: Activity DEFAULT: Use to recover lost password or Off: to return TCP/IP settings to no link factory default values.

  • Page 10: Chapter 2 Installation

    FRM220-CH20 CH01-XX Chassis (XX= AC, DC, AA, DD or AD) FRM220-CH01, single slot chassis Requires external AC to DC 12V switching adapter. Figure 2.1 Chassis options for FRM220-10/100AS-2 card Follow all ESD precautions when handling the card and SFP modules.

  • Page 11: Electrical Installation

    Figure 2.2 IEC (AC) & terminal block (DC) power connector pin assignment 2.3 Installation of SFP Modules CTC Union supplied SFP modules are of the Bale Clasp type. The bale clasp pluggable module has a bale clasp that secures the module into the SFP cage.

  • Page 12: Chapter 3 Provisioning Via Telnet

    Chapter 3 Provisioning via Telnet 3.1 Introduction The FRM220-10/100AS-2 is accessible through a TCP/IP network over Ethernet. The Telnet protocol is employed to provide an easy to use, text based, menu system for performing all configuration functions. In most cases, we recommend that the networking engineer start configuration by using Telnet.

  • Page 13: System Configuration

    <6> TFTP File Name : This is the filename (case sensitive) of the firmware image that is placed on the TFTP server and that must be downloaded by the TFTP client in the FRM220-10/100AS-2. <7> Do TFTP and Update Firmware : This command will start the upgrade process. First the image file will be downloaded into local RAM.

  • Page 14: Firmware Upgrade

    FRM220-10/100AS-2 Operation Manual 3.3.1 Firmware Upgrade Occasionally, CTC Union will release new firmware for their products. If new functions are added through software modification or if programming errors are uncovered and resolved, those items will be listed in the firmware release note which is included in an 'upgrade package' along with a detailed upgrade procedure and the firmware image code.
  • Page 15 'Run' and enter 'cmd' in the Run window and click 'OK'). Check the TCP/IP settings with the 'ipconfig' command and then 'ping' the FRM220-10/100AS-2. Make sure the network connection works and is reliable. (note: if ping times out, try doing 'arp –d' command, then if still unsuccessful check cables.)
  • Page 16 FRM220-10/100A has been returned to its factory default setting. Confirm that the TFTP server IP matches your PC or Laptop and that the image filename matches our upgrade file name. Press the '7' key "TFTP Download File System". **************************************************************** CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.000 **************************************************************** <<...
  • Page 17 FRM220-10/100AS-2 Operation Manual You will be prompted for a final Yes or No. **************************************************************** CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.000 **************************************************************** << System >> Version [v1.000--v3.000--v0.000--v0.000] Snmp Action [Stand-alone] Logo [CTCU] Model [10_100A] MAC Address [00:02:ab:ff:ff:fe] <1> : IP Address [10.1.1.1]...
  • Page 18 ############################################ Rebooting ... Step 10. After update, the FRM220-10/100AS-2 will automatically reboot. The current Telnet session will close. (During reboot, all LEDs will first go out, then all LEDs will light. The "Test" LED will extinguish first and a few seconds later the LEDs will return to normal running and link states.)

  • Page 19: Alarm Settings

    Step 11. Use Telnet client and login to the FRM220-10/100AS again. The following screen shows the 10/100A updated to 3.016. For a newer version, these numbers should reflect the new version. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 *************************************************...
  • Page 20 In the following example, the local Major alarm indication is presented whenever any of the "checked" events occur. Fiber link down or remote power failure will be reported as Major alarms. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* <<...

  • Page 21: Date & Time Setup

    NTP (Network Time Protocol) or SNTP (Simple Network Time Protocol). From the Main Menu, select the <S> (System Configuration) and from this menu select <T> (Date and Time). ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* << Date and Time >>...

  • Page 22: System Reboot

    If enabled, STP (Spanning Tree Protocol) discovery will need to rebuild path tables. From the Main Menu, select the <S> (System Configuration) and from this menu select <R> (System Rebooting). Confirmation is required. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* << System Configuration >>...

  • Page 23: Fiber Port Provisioning

    FRM220-10/100AS-2 Operation Manual 3.3.6 Fiber Port Provisioning ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* Fiber 1 [Link Up ] [Remote LB: Off 2 [Link Down ] [Speed: -----] [Duplex: ----] 3 [Link Up ] [Speed: 100 M] [Duplex:...
  • Page 24 FRM220-10/100AS-2 Operation Manual 3.3.6.1 Fiber Port 1 Provisioning ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* << Local Fiber 1 Status and Configuration >> Link Status <=Status Far End Fault [Off Remote Device Power OAM Remote Loopback Test [Off...

  • Page 25: Fiber Port 1 Rate Limiting

    Also, since the packets are dropped, the application layer can only deal with the packet loss by timing out. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* <<...

  • Page 26: Utp Port Provisioning

    FRM220-10/100AS-2 Operation Manual 3.3.9 UTP Port Provisioning ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* Fiber 1 [Link Up ] [Remote LB: Off 2 [Link Down ] [Speed: -----] [Duplex: ----] 3 [Link Up ] [Speed: 100 M] [Duplex:...
  • Page 27 FRM220-10/100AS-2 Operation Manual 3.3.9.1 UTP Port 3 Provisioning ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* << Local UTP 3 Status and Configuration >> Link Status Speed [100M] Duplex [Full] <1> :Port Active [Enable ] <2> :Negotiation [Auto <5> :QoS Default Port Priority [0] Ingress Rate Limit: <6>...
  • Page 28 Also, since the packets are dropped, the application layer can only deal with the packet loss by timing out. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* <<...

  • Page 29: Device Status And Configuration

    FRM220-10/100AS-2 Operation Manual 3.4 Device Status and Configuration ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* Fiber 1 [Link Up ] [Remote LB: Off 2 [Link Down ] [Speed: -----] [Duplex: ----] 3 [Link Up ] [Speed: 100 M] [Duplex:...
  • Page 30 FRM220-10/100AS-2 Operation Manual ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* << Local Device Status and Configuration >> <1> :Pause Frame [Disable] <2> :Advance Functions [Normal ] <3> :Maximum OAMPDUs Size (60 ~ 1518 Octets) [1500] <4> :Accept Remote H/W Reset [Disable] <5>...

  • Page 31: Advanced Functions

    FRM220-10/100AS-2 Operation Manual 3.5 Advanced Functions ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* << Local Device Status and Configuration >> <1> :Pause Frame [Disable] <2> :Advance Functions [Normal ] <3> :Maximum OAMPDUs Size (60 ~ 1518 Octets) [1500] <4>...

  • Page 32: Port 1 To Port 2 Mirror

    FRM220-10/100AS-2 Operation Manual 3.5.1 Port 1 to Port 2 Mirror 10/100AS2 10/100AS2 Fiber LAN A LAN B The mirror mode provides fiber aggregation or 'trunking'. It uses one or two fiber lines to achieve this feature. 3.5.2 Port VLAN (1/3; 2/4)

  • Page 33: Static 802.1Q Vlan

    VID10 for port3 and VID20 for port 4 and returned to the L2 switch and then to the appropriate servers. Configuration example, done to remote converter: 1. Return to the main menu on the local unit. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* Fiber 1 [Link Up...
  • Page 34 FRM220-10/100AS-2 Operation Manual 2. Select item <A> to go to Remote A Status and Configuration. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* << Remote A Status and Configuration >> NMC Action [Inactive (Stand alone)] <1> :Fiber 1 Status and Configuration.
  • Page 35 FRM220-10/100AS-2 Operation Manual 5. From the Advanced Functions screen, select <4> Static 802.1Q VLAN. The following screen will be displayed. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100A ver:3.016 ************************************************* << Remote A Device Status and Configuration >> <1> :Pause Frame [Disable] <2>...
  • Page 36 FRM220-10/100AS-2 Operation Manual ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* << Local Static 802.1Q VLAN status and Configuration >> Port 1: <1> :VID <2> :QinQ Support [Disable] Priority for Tag: Default port priority re-mapped to [0] Port 2: <3>...
  • Page 37 FRM220-10/100AS-2 Operation Manual 9. Next we need to go to the VLAN Table Configuration Page. Select item <Z>. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* << Local Static VLAN Table Configuration >> Item | VLAN ID Port 1...
  • Page 38 <1> UnModified <2> UnTagged <3> Tagged <4> NonMember Page. <ESC>:Previous The results look like this. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* << Remote A Static VLAN Table Configuration >> Item | VLAN ID Port 1 Port 2...

  • Page 39: Static 802.1Q Vlan & Port 1/2 Redundancy

    FRM220-10/100AS-2 Operation Manual 3.5.5 Static 802.1Q VLAN & Port 1/2 Redundancy By choosing the Advanced Feature of Static VLAN and Port Redundancy, the previous application in section 3.5.4 with VLAN can be combined with section 3.5.3 Port 1 + Port 1 fiber redundancy.
  • Page 40 FRM220-10/100AS-2 Operation Manual 1. Return to the main menu on the local unit. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* Fiber 1 [Link Up ] [Remote LB: Off Fiber 2 [Link Up ] [Remote LB: Off 3 [Link Up...
  • Page 41 FRM220-10/100AS-2 Operation Manual ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* << Local Device Status and Configuration >> <1> :Pause Frame [Disable] <2> :Advance Functions [Normal ] <3> :Maximum OAMPDUs Size (60 ~ 1518 Octets) [1500] <4> :Accept Remote H/W Reset [Disable] <5>...
  • Page 42 FRM220-10/100AS-2 Operation Manual 6. Select <S>. to bring up the Spanning Tree Status and Configuration menu. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* << Local Spanning Tree Status >> Bridge Status: STP Enable Bridge ID [8000.0002abfffe02] Designated Root [8000.0002abfffe02]...

  • Page 43: Oam Configuration

    To configure, from the main menu, select <L> (Local Status and Configuration), then select <D> (Device Status and Configuration). From this menu select <3> (Maximum OAMPDUs Size) and set as follows. ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* <<...

  • Page 44: Oam Mode

    The OAM in the 10/100A converter only works on fiber links. Both units on the fiber link must be CTC Union 10/100A family units. The OAM mode can be set to one of three choices: disabled, active or passive. In the OAM scheme, the 'active' unit will provide the OAM configuration to 'passive' unit during OAM discovery phase.
  • Page 45 FRM220-10/100AS-2 Operation Manual To configure, from the main menu, select <L> (Local Status and Configuration), then select <L> (Link Loss Forwarding Configuration). ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* << Local Link Loss Forwarding Configuration >> Condition Port 1...

  • Page 46: Snmp Configuration

    FRM220-10/100AS-2 Operation Manual 3.8 SNMP Configuration 3.8.1 General The Simple Network Management Protocol (SNMP) is one of many protocols in the Internet Protocol (IP) suite. SNMP is the protocol recommended specifically for the exchange of management information between hosts residing on IP networks. Network management allows you to monitor and control network devices remotely using conventional computer network technology.

  • Page 47: Mib Structure

    The assigned number designates the top of an enterprise-specific sub-tree of non-standard MIB's. Enterprise-specific MIB's are published and distributed by their creators, who are responsible for their contents. The MIB supported by the FRM220-10/100AS-2 SNMP Agent follows RFC 1213 (MIB-2 standard). 3.8.5 SNMP Communities To enable the delimitation of management domains, SNMP uses "communities".

  • Page 48: Configuring The Snmp Agent

    Manager. Manager configuration is required to tell the agent (the SNMP) who has authority to access the SNMP via "Get" commands (read) or "Set" commands (write) and where to send "trap" messages (unsolicited messages that are usually generated by alarms in the 10/100A). ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* <<...

  • Page 49: Configuring Snmp Traps

    Alarm Management, see section 3.3.2. The only configuration done here for traps is to enter the trap destination IP address. From the SNMP Manager menu, select <N> (Go to Trap Configuration Menu). ************************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-10/100AS-2 ver:3.016 ************************************************* <<...

  • Page 50: Chapter 4 Provisioning Via Web Based Management

    2. SNMP – The allowed SNMP managers, community strings and Trap Managers are set here. There is also a 'System Log' which can be viewed by selecting System Log under the SNMP main menu item. 3. The actual FRM220-10/100AS-2 units, local, Remote A, and Remote B can be entered for configuration with these items.

  • Page 51: System

    FRM220-10/100AS-2 Operation Manual 4.3 System The following page is an example of the 'System' screen of the 10/100A. There are three 'Tabs' for different setting windows. 4.3.1 Setup The 'Setup' tab contains the networking settings for IP address, subnet mask, default gateway, hostname, TFTP server IP and image upgrade filename.

  • Page 52: Alarm Setting

    FRM220-10/100AS-2 Operation Manual 4.3.3 Alarm Setting The alarm settings here are used to generate SNMP traps for any of the Major and Minor conditions via simple to click 'checkboxes'. In the example below, Major alarms are sent for Fiber link loss or Remote power failure while Minor alarms are sent for UTP link loss.

  • Page 53: Trap

    FRM220-10/100AS-2 Operation Manual 4.4.2 Trap Traps are unsolicited messages issued by the SNMP agent that typically indicate some alarm condition has occurred. The Trap managers (those who receive the traps) are configured here. SNMP manager at 10.1.1.100 receives traps with community 'secret'.

  • Page 54: Local Unit Configuration

    FRM220-10/100AS-2 Operation Manual 4.5 Local Unit Configuration 4.5.1 Fiber 1 This window tab will show current status and provide settings for the first fiber port. Refer to Chapter 3 section 3.3.6 and 3.3.7 for the meaning of these parameter settings. The...

  • Page 55: Utp 3

    FRM220-10/100AS-2 Operation Manual 4.5.2 UTP 3 This window tab will show current status and provide settings for the first UTP port. Refer to Chapter 3 section 3.3.9 for the meaning of these parameter settings. The setting method for UTP 4 is identical to that of UTP 3.

  • Page 56: Spanning Tree Protocol

    FRM220-10/100AS-2 Operation Manual 4.5.4 Spanning Tree Protocol Please refer to Chapter 3, section 3.5.8 for a description of and operation of STP in this device. 4.5.5 Static 802.1Q VLAN Please refer to Chapter 3, section 3.5.5 for a description of and operation of Static VLAN...
  • Page 57 FRM220-10/100AS-2 Operation Manual Static VLAN Example This static VLAN application was used in Chapter 3 section 3.5.5. Here we will use the web based interface to do the settings rather than the Telnet menu system. This should help the end user to better understand the setting methodology using the friendlier web interface.
  • Page 58 FRM220-10/100AS-2 Operation Manual Step 2. Setup the VID for 1, 10, and 20 for the fiber and two UTP ports. Then, from the 'Operate' pull- down, select 'Create' and one by one setup the VID1, VID10 and VID20 static VLANs.

  • Page 59: Counters

    FRM220-10/100AS-2 Operation Manual 4.5.6 Counters There are counters for OAM packets and counters for RMON data bytes. They can be viewed under the 'Counters' screen. The OAM counters are available for each fiber port. In this example, we are looking at a remote converter with only a single Fiber channel.

  • Page 60: Sfp

    FRM220-10/100AS-2 Operation Manual 4.5.7 SFP Modern optical SFP transceivers support digital diagnostics monitoring (DDM) functions according to the industry-standard SFF-8472. This optional feature in SFP is also known as digital optical monitoring (DOM) and gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, etc.

This manual is also suitable for:

Frm220-10/100a

Table of Contents