Table of Contents
Advertisement
• Use the
" – ").
• Press button
• Press the
s
tat i o n
Herein you can switch on resp. off the station filter. This influences the behav-
iour of the cassette when changing the station assignment of the input signals.
– Filter on: Only stations which are selected (+) in menu Station filter – Selec-
tion will be passed. New stations will be blocked until they will be activated
in the Station filter – Selection menu (+).
– Filter off: All stations will be passed – also "new" stations – this may cause
data overflow at the output!
—> If a service number (e.g. "131") appears instead of "TV" or "RA",
this indicates that an unnamed station or an undefined data stream
is being received.
buttons to call up the stations in sequential order, then use
to activate (indicated by " + ") or to deactivate them (indicated by
—> Using button
—> If a station is scrambled (indication "*"), in this menu you select
whether it should be descrambled using an adequate CA module.
twice to descramble a station (indication "X").
button.
—> The "Station filter on/off" – "FILTER" submenu is activated.
/
f i lt e r
o n
o f f
—> The menus Station filter on/off and Station filter – Selection influ-
ence each other:
If a station will be deactivated (–) in the Station filter – Selection
menu, the station filter is activated (on).
all station can be activated/deactivated.
Bx
4A/B
TV * X
01/04
Bx
4A/B
FILTER
off
- 26 -
CC2CT 800 C
Advertisement
Table of Contents
