Table of Contents
Advertisement
o
P t i o n s
In this menu you select the channel strip for which you would like to do the
option settings in the related submenus.
• Using the buttons
• Press button
t
r a n s P o r t
If the stations of a transponder are split into the transport streams of several
channel strips, a new identification must be allocated to the further transport
streams to realise the channel search of the settop boxes connected without
mistakes.
If the ORGNET-ID is changed also a new NIT must be generated (page 33).
• Use the
mal number to be set.
• Press
• Repeat the procedure by the quantity of the digits to be set.
• Using the
mitter identification using the
Bx 4
A
—> In order to skip the "Option settings", press button
—> It is possible to rotate through the channel strips within the submenus
using the buttons
select the desired channel strip.
.
—> The "Transport stream ID and ORGNET-ID" – "TS/ONID" menu is
activated.
id
orgnet-id
s t r e a m
a n d
Bx
0x0001,0100
buttons to position the cursor under the digit of the hexadeci-
to set the respective digit of the hexadecimal number.
button place the cursor under "off" and switch "on" the trans-
—> By pressing the
setting.
OPTIONS
=>
and
4A/B
TS/ONID
off
buttons.
button you return to the hexadecimal number
- 30 -
.
.
CC2CT 800 C
Advertisement
Table of Contents
