Renaming A Pid - Triax CC2CT 800 C Assembly Instruction Manual

hexadecimal number of the PID to be deleted ("0x0000") and set the hexa-
decimal number using
• Use the
• Press the
r
e n a m i n g
In this menu you can allocate a new address to a PID retaining the complete
data content.
• Use the
the hexadecimal number of the PID to be changed ("0x0000") and set the
hexadecimal number using
• Use the
hexadecimal number of the new PID ("–> 0000").
• Set the hexadecimal number using
• Use the
• Press the
• Press the
button to set the cursor under "off" and delete the PID using the
buttons ("on").
button.
— > The "Renaming a PID" – "REMAP" submenu is activated (page 32).
Pid
a
Bx
0x0000–>0000
buttons to place the cursor under the respective digit of
buttons to place the cursor under the respective digit of the
button to set the cursor to "off" and rename the PID using the
buttons ("on").
button.
—> Returning to "Option settings" main menu (page 30).
—> If necessary set further channel strips.
button.
—> The "Output data rate" – "DATARATE" main menu is activated.
.
4A/B REMAP
off
.
.
- 32 - CC2CT 800 C