Husqvarna Vitpilen 401 2018 Owner's Manual page 216

19 SERVICE WORK ON THE ENGINE
214
–
Remove screws
ring.
–
Pull oil filter 7
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surface.
E01120-10
–
Insert new oil filter
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
Info
Too little engine oil or poor-quality engine oil will result
E01121-10
in premature wear of the engine.
5 6
. Take off oil filter cover
out of the oil filter housing.
7
.
M6 10 Nm (7.4 lbf ft)
with the O-
6
.