Husqvarna Vitpilen 401 2018 Owner's Manual page 171

–
Pull the rear wheel back and mount wheel spindle
the washer and chain adjuster
Guideline
Mount left and right chain adjusters
tion.
–
2
Mount nut
–
Make sure that the chain adjusters are fitted correctly on the
screws.
–
Check the chain tension. (
–
2
Tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the
markings on the left and right chain adjusters must be in
the same position relative to reference markings
Nut, rear wheel spin-
dle
–
Position wheel speed sensor
E01125-12
–
Mount and tighten screw
Guideline
Screw, wheel speed
sensor
WHEELS, TIRES 15
4
.
4
in the same posi-
with the washer.
p. 138)
.
M14x1.5 90 Nm (66.4 lbf ft)
5
in the drill hole.
6
.
M6 8 Nm (5.9 lbf ft)
3
with
B
.
169