14 Brake System; Antilock Brake System (Abs) - Husqvarna Vitpilen 401 2018 Owner's Manual

14 BRAKE SYSTEM

14.1
144

Antilock brake system (ABS)

H02679-10
1
The ABS module , which consists of a hydraulic unit, ABS
control unit, and return pump, is installed under the fuel tank.
One wheel speed sensor 2
and the rear wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
–
Only allow the rear wheel to spin with the front brake
applied if the ABS is switched off (burn out).
–
Do not make any changes to the suspension travel.
–
Only use spare parts on the brake system which have
been approved and recommended by Husqvarna
Motorcycles.
–
Only use tires/wheels approved by Husqvarna Motor-
cycles with the corresponding speed index.
–
Maintain the specified tire air pressure.
–
Service work and repairs must be performed prop-
erly. (Your authorized Husqvarna Motorcycles work-
shop will be glad to help.)
is located in each case on the front