Wheels, Tires 15; Removing The Front Wheel - Husqvarna Vitpilen 401 2018 Owner's Manual

15.1

Removing the front wheel

Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
Remove screws
slightly to the side.
–
Remove screw
the hole.
–
Loosen screw
–
Loosen screws
–
Press on screw
clamp.
–
Remove screw
Warning
Danger of accidents Reduced braking effect
caused by damaged brake discs.
–
Always lay the wheel down in such a way that the
brake discs are not damaged.
–
Holding the front wheel, withdraw the wheel spindle. Take the
E01130-10
front wheel out of the fork.

WHEELS, TIRES 15

1
with washers and push the fender
2
and pull wheel speed sensor
4
by several rotations.
5
.
4
to push the wheel spindle out of the axle
4
.
p. 108)
p. 112)
3
out of
161