Checking The Chain Tension - Husqvarna Vitpilen 401 2018 Owner's Manual

13 SERVICE WORK ON THE CHASSIS
13.16
138

Checking the chain tension

Warning
Danger of accidents Incorrect chain tension damages components and results in accidents.
If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear
wheel bearings wear more quickly. Some components may break if overloaded.
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the
rear wheel locks or the engine will be damaged.
–
Check the chain tension regularly.
–
Set the chain tension in accordance with the specification.
M00714-10
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Shift gear to neutral.
–
In the area of the chain sliding guard, press the chain upward
toward the swingarm and determine chain tension
Info
The upper part of chain
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
p. 108)
A
.
B
must be taut.