Husqvarna Vitpilen 401 2018 Owner's Manual page 205

Preparatory work
–
Remove the seat. (
–
Remove the right side cover.
Main work
–
Remove radiator cap
E01113-11
–
Loosen bleeder screw
Guideline
3 turns
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the
bleeder screw, and then mount and tighten the bleeder screw
immediately.
Coolant (
E01115-10
–
Completely fill the radiator with coolant. Mount the radiator
cap.
–
Rest the vehicle on the side stand.
COOLING SYSTEM 17
p. 115)
( p. 121)
1
.
2
.
p. 246)
203