Husqvarna Vitpilen 401 2018 Owner's Manual page 113

SERVICE WORK ON THE CHASSIS 13
–
Mount and tighten screw
Guideline
Screw, license
plate holder
E01124-11
Condition
Rear wheel was removed.
–
Secure the motorcycle against falling over.
–
Remove the rear lifting gear and lean the vehicle on side
1
stand
–
Remove bushings kit.
Info
Do not ride with mounted bushings, as the bush-
402029-10
ings can collide with the main silencer.
–
Install the license plate holder. (
2
.
M10x30 45 Nm (33.2 lbf ft)
.
p. 131)
Loctite ® 243™
111