Setting The Date And Time; Idle Mode; Run Mode; Programming - Hunter Node Owner's Manual

IDLE MODE

Normally the NODE display shows the time and day, day of the
week, MV (if master valve option is activated) and the battery life
indicator . During a short period of inactivity the display will shut off
to retain battery power . Pressing any button will wake up the NODE
to the Idle Mode .

RUN MODE

When the controller is operating a program the items shown on the
display will include the station number, program letter, remaining
runtime, and the blinking Rotor icon .
7

PROGRAMMING

The NODE uses standard Hunter controller programming with 3
programs (A, B, C) and 4 start times per program . On standard
Hunter controllers a dial is used to scroll between the programming
functions, however, on the NODE the
and easily create the irrigation program . When programming, the
flashing portion of the display can be changed by pressing the
or buttons . To change something that is not flashing, press the
or buttons until the desired item is flashing .

Setting the Date and Time

1 . Push the button until the
2 . All 4 digits will be displayed representing the year . Use the
or buttons to change the year . Press the
proceed to setting the month .
3 . All 4 digits will be displayed with the two digits on the left
representing the month flashing . Use the
change the month . Press the
the day .
4 . Only the two digits on the right side will be displayed and
flashing, representing the day . Press the
change the day . Press the
the hour . Press the button to proceed to setting the time .
5 . The AM/PM/24 time setting is shown flashing . Press the
button to change the time setting to AM, PM, or 24-hour
time . Press the button to proceed to setting the hour .
ENG
button is used to quickly
icon is displayed .
button to
or buttons to
button to proceed to setting
or button to
button to proceed with changing
or