Advanced Programming Features; Sensor Bypass; Easy Retrieve Memory - Hunter Node Owner's Manual

ADVANCED PROGRAMMING FEATURES

All advanced programming functions are initiated from the Idle
Mode, which shows the time, day of the week, and battery life
indicator on the display . If something is flashing on the display then
the controller is in one of the programming modes . After a short
period of inactivity the controller will return to Idle Mode .

Sensor Bypass

1 . From the Idle Mode, press and hold the
icon is displayed .
2 . The display will show the umbrella icon flashing and On .
3 . Press the button to bypass the sensor . The display will show
and Off indicating the weather sensor is bypassed .
The icon will show on the display during normal operation,
indicating the controller is in bypass mode .
4 . To reactivate the weather sensor press and hold the
until the icon is displayed . Press the
normal sensor mode .

Easy Retrieve Memory

This function allows the user to save a preferred program to
permanent memory in the controller, to be restored at any time .
This is a great way to override changes made, and revert back to
the original programming schedule .
To save a program:
button until the
1 .
2 .
3 .
To retrieve a saved program:
1 .
button
2 .
button to return to
The controller now has the preferred program as the current
program . The display will flash Done when the process
is complete .
Make sure that the controller is programmed with the
preferred programming schedule .
From the Idle Mode, press and hold the
5 seconds to save the current program .
The screen will show 3 dashed lines moving from left to
right indicating that the current program is being saved to
permanent memory . The display will flash Done when the
process is complete .
From the Idle Mode, press and hold the
5 seconds .
The screen will show 3 dashed lines moving from right to
left indicating that the preferred program is being retrieved
from memory .
ENG
and button for
and button for
12