AquaProbe FEA100 / FEA200
Electromagnetic flowmeter – insertion-type flow sensors
2 System Schematic
AquaMaster3 FET200
Transmitter
AquaMaster 3
Fig. 2.1 System Schematic
Caution.
Care of the Equipment
The tip of the flow sensor is a precision-built part of the equipment and must be handled with
care.
When the flow sensor is not in use, fully retract the tip of the flow sensor and replace the end-cap.
When removing / inserting the flow sensor into the pipeline, ensure that the valve is fully open.
Damage to the flow sensor affects the performance.
Physical damage to the flow sensor invalidates the warranty.
OI/FEA100/200–EN Rev. D
WaterMaster FET100
Transmitter
or
2 System Schematic
Flow Sensor
7