AquaProbe FEA100 / FEA200
Electromagnetic flowmeter – insertion-type flow sensors
3.3 Location – Flow Conditions
The flow sensor can be installed in one of two positions in the pipe:
on the centre line
or
at the mean axial velocity point (
It can also be traversed across the pipe to determine the velocity profile.
Note. Ensure the sensor is installed in the pipe so the flow direction arrow on the flow sensor case
matches the pipe flow.
Fig. 3.2 Flow Conditions
10
1
/
pipe diameter)
8
5 Diameters
See Table 3.1, Page 11
3 Mechanical Installation
OI/FEA100/200–EN Rev. D