The Operation Mode Screen - ZyXEL Communications LTE3202-M430 User Manual

The following table describes the labels in this screen.
Table 17 Configuration > WAN network > Data Usage/Statistic
LABEL
Package Data Limit Setting
Enable data
limit
Total allowance
Notify me when
data usage
reaches
Reset date
Apply
Reset
Reset Network Statistics
Reset all of the
statistics and
history
Current Connection Statistics
Data Flow
Sent
Received
Current
Connection
Time
Total Connection Statistics
From
Data Flow
Sent
Received
Total
Connection
Time

6.7 The Operation Mode Screen

The LTE3202-M430 supports two operation modes: Router Mode and Bridge Mode.
• Router mode: This is the default operating mode of the LTE3202-M430. Use the router mode if you want
to use routing functions, such as firewall, DHCP, NAT, and so on. The following figure shows an
example of the LTE3202-M430 in router mode.
Chapter 6 WAN Network
DESCRIPTION
Select the check box to enable data limits.
Specify the limiting the amount of the package data (in GB) in this field.
Specify the reminding percentage of the package data usage in this field.
Specify the date that you want the LTE3202-M430 to restart calculating the amount of the
package data per month.
Click Apply to save your changes back to the LTE3202-M430.
Click Reset to reload the previous configuration for this screen.
Click Reset to remove all traffic statistics.
This indicates the current traffic flow transmitting from/to the LTE3202-M430.
This indicates the number of transmitted packets on the LTE3202-M430.
This indicates the number of received packets on the LTE3202-M430.
This indicates how long the LTE3202-M430 has been connected to a 4G/3G/2G network, this time
returns to 0 each time the LTE3202-M430 is rebooted.
This displays the start month and date (mmdd) for the statistics.
This indicates total traffic flows transmitting from/to the LTE3202-M430.
This indicates the number of transmitted packets on the LTE3202-M430.
This indicates the number of received packets on the LTE3202-M430.
This indicates how long the LTE3202-M430 has been connected to a 4G/3G/2G network from the
first time this device is booted until the LTE3202-M430 is reset to factory-default settings.
LTE3202-M430 User's Guide
39