Mitsubishi Electric CR750-D Series Instruction Manual page 55

(5) See below for the [Dedicated Signal Monitor 2/2] screen. For details of the operation buttons,
see [4-10: Details and Roles of "Dedicated Signal Monitor" Operation Buttons].
④
⑥
【Screen Specifications】
Screen to monitor the dedicated robot I/O signals
(1) Back・・・Switches the dedicated signal monitor screens ［Dedicated Signal Monitor 2/2］→
(2) Next・・・Switches the dedicated signal monitor screens ［Dedicated Signal Monitor 2/2］→
［Dedicated Signal Monitor 1/2］
(3) Dedicated Signal・・・Displays the dedicated I/O signal status of robot controller
* For details of the dedicated I/O signals, see [Table 4-12: Details of the Dedicated
Signal Monitor "Dedicated Signal Monitor 2/2"]
(4) Display of Running State・・・Lights the lamp according to the robot running status
* Automatic Operation in Progress (green) Servo Power ON (green) Error (red) Current
operation speed value (%)
(5) UP/DOWN・・・Changes the operation speed in the OVRD display UP (speed-up),
(6) Common Buttons・・・Jump to each screen
* "STOP" stop a running program (Servo remains ON)
［Dedicated Signal Monitor 1/2］
DN (speed-down)
③
48
①
②
⑤