Installing Memory; Installing Dimms; Memory Support - Quantum NDX Series User Manual

Installing Memory

Installing DIMMs

Memory Support

Quantum NDX NAS 1U Rack User's Guide
Caution: Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage.
1 Insert the desired number of DIMMs into the memory slots, starting
with slots 1. DIMM1A. Pay attention to the notch along the bottom
of the module to pre-vent inserting the DIMM module incorrectly.
See Figure 7 on page 20.
2 Gently press down on the DIMM module until it snaps into place in
the slot. Repeat step 1 to install to DIMM1B if needed.
The NDX NAS supports up to 32GB of ECC unbuffered (UDIMM) DDR3-
1333/1066 memory in four memory slots. Populating these slots with a
pair of memory modules of the same type and same size will result in
interleaved memory, which will improve memory performance. Please
refer to the table below:
Chapter 3: Server Installation
Installing Memory
19