Hardware Overview; Control Panel Buttons; Chapter 4 Initial Setup And System Interface - Quantum NDX Series User Manual

Chapter 4: Initial Setup and System Interface

Hardware Overview

Hardware Overview

Control Panel Buttons

24
There are several LEDs on the control panel as well as others on the hard
drive carriers to keep you constantly informed of the overall status of
the system as well as the activity and health of specific components.
There are also two buttons on the chassis control panel and an on/off
switch on the power supply. This chapter explains the meanings of all
LED indicators and the appropriate response you may need to take.
There are two push-buttons located on the front of the chassis. These
are (in order from left to right) a reset button and a power on/off
button.
• Reset: The reset button is used to reboot the system.
• Power: This is the main power button, which is used to apply or
turn off the main system power. Turning off system power with this
button removes the main power but keeps standby power supplied
to the system.
Quantum NDX NAS 1U Rack User's Guide