Figure 7 Installing Dimm Into Slot - Quantum NDX Series User Manual

Chapter 3: Server Installation
Memory Support
Figure 7 Installing DIMM into
Slot
To Install: Insert module
vertically and press
down until it snaps into
place. Pay attention to
the alignment notch at
the bottom.
To Remove:
Use your thumbs to
gently push the release
tabs near both ends of
the module. This should
release it from the slot.
20
DDR3 Unbuffered ECC (UDIMM) Memory
DIMM Slots DIMMs
per Channel Populated per
Channel
2 1
2 2
Slot 2, Channel 2
(Blue Slot)
Slot 2, Channel 1
Slot 1, Channel 2
(Blue Slot)
Slot 1, Channel 1
Notch
Release Tab
Top View of DDR3 Slot
DIMM Type POR Speeds
Unbuffered 1066, 1333
DDR3
Unbuffered 1066, 1333
DDR3
Front View
Note: Notch should align
with the receptive key
point on the slot.
Quantum NDX NAS 1U Rack User's Guide
Ranks per DIMM
(any combination)
Single Rank, Dual
Rank
Single Rank, Dual
Rank
Notch
Release Tab