Figure 5 Installing The Server Into A Rack - Quantum NDX Series User Manual

Figure 5 Installing the Server
into a Rack (with optional front
bezel shown)
Quantum NDX NAS 1U Rack User's Guide
Installing the Server into the Rack
You should now have rails attached to both the chassis and the rack
unit. The next step is to install the server into the rack. Do this by lining
up the rear of the chassis rails with the front of the rack rails. Slide the
chassis rails into the rack rails, keeping the pressure even on both sides
(you may have to depress the locking tabs when inserting). See
on page 17.
When the server has been pushed completely into the rack, you should
hear the locking tabs "click".
Chapter 3: Server Installation
Installing the System into a Rack
Figure 5
17