Preparing For Setup; Choosing A Setup Location - Quantum NDX Series User Manual

Chapter 3: Server Installation

Preparing for Setup

Preparing for Setup
Choosing a Setup
Location
12
Decide on a suitable location for the rack unit that will hold the
Quantum NDX NAS 1U Rack. It should be situated in a clean, dust-free
area that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic fields are generated. You will also need it placed near a
grounded power outlet. Read the
page 13.
The box the Quantum NDX NAS 1U Rack was shipped in should include
two sets of rail assemblies, six rail mounting brackets and the mounting
screws you will need to install the system into the rack. Follow the steps
in the order given to complete the installation process in a minimal
amount of time.
Important: Read this section in its entirety before you begin the
installation procedure outlined in the sections that follow.
• Leave enough clearance in front of the rack to enable you to open
the front door completely (-25 inches) and approximately 30 inches
of clearance in the back of the rack to allow for sufficient air flow
and ease in servicing.This product is for installation only in a
Restricted Access Location (dedicated equipment rooms, service
closets and the like).
• This product is not suitable for use with visual display work place
devices according to §2 of the German Ordinance for Work with
Visual Display Units.
Warnings and Precautions
Quantum NDX NAS 1U Rack User's Guide
on