Table of Contents
Advertisement
Dismantling the damper insert
Disconnect the measuring tubes and damper motor cable.
Fold away the perforated mesh.
Turn the damper insert so that the bayonet fitting
releases. Pull out the damper insert.
Figure 6. Dismantling the damper insert. Reassemble, in the
reverse order.
Replacement of WISE CU
Disconnect the measuring tubes and cables from WISE CU.
Pull WISE CU downwards and angle out from the holder.
Figure 7. Replacement of WISE CU. Reassemble, in the reverse
order and connect hoses and contactors from WISE CU, see
"Connection". Apply the new supplied QR codes over the exist-
ing QR codes on the product.
20181012
Swegon reserves the right to alter specifications.
WISE Colibri Ceiling
7
Advertisement
Table of Contents
