SHOWTEC Colorburst V1 Manual page 7

Colorburst
Compliance Statement
Your Colorburst Laser has been designed to comply with FDA and IEC Standards for its classification.
The Colorburst is a Class 2M laser product.
Laser Safety and Compliance Information
The Colorburst is manufactured to comply with the IEC 60825-1 and in accordance with U.S. Food and
Drug Administration (FDA) Standards Listed under FDA Document 21 CFR 1040 and subsequent laser
notices.
Product Classification and Manufacturing Label Identification
Laser Classification
Cooling
Laser medium
Output
Beam Diameter
Pulse Data All pulses
Divergence (each beam)
Divergence (total light)
The legal requirements for using laser entertainment products vary from country to country. The user is
responsible for the legal requirements at the location/country of use.
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard
"For Safe Use of Lasers", available from www.lia.org/. Many local governments, corporations, agencies,
military and others, require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display
guidance can be obtained via the International Laser Display Association, www.ilda.com/index.htm.
CAUTION: The use of corrective eye wear or optics for viewing at distances such as telescopes or
binoculars within a distance of 100mm may pose an eye hazard.
Proper Usage Safety and Compliance Information
Ordercode: 43163
Class 2M
Cooling fans and TE Cooling
wavelength 650 nm / Red (Laser Diode GaAIAs) ; Output >100mW
wavelength 532 nm / Green (DPSS Nd: YVO4); Output >35mW
135mW
<5mm at aperture
< 4Hz (>0.25sec)
<2 mrad
<160 degrees
This laser product is a Class 2M laser and has an interlocked
housing.
There are no user serviceable parts inside. Tampering or
removing warranty seals will void your products limited
warranty.
Combo label with the Product Model Number, Serial
Number, Date of Manufacturing, Laser Light Warning Label,
Warranty Void Label and Interlocked Housing Label
6