Auto Run Programs; Sound-Controlled Mode; Static Control Mode - SHOWTEC Colorburst V1 Manual

Colorburst

1. Auto Run Programs

With this menu you can start several Auto Run Programs.
01) Press the Menu button until the display shows
02) Press the Enter button to open the menu.
03) Press the Up and Down buttons to choose between 7 built-in programs
04) Choose the desired built-in program and press the Enter button to confirm.
05) The Colorburst will immediately start the desired Auto run program.
06) Press the Enter button again to set the speed of the desired Auto run program.
07) Press the Up and Down buttons to adjust the speed between

2. Sound-controlled Mode

With this menu you can choose several Sound-controlled programs.
01) Press the Menu button until the display shows
02) Press the Enter button to open the menu.
03) Press the Up and Down buttons to choose between 7 Sound-controlled programs
04) Choose the desired type and press the Enter button to confirm.
05) Turn on the music and the Colorburst will immediately start the desired Sound-controlled program.

3. Static Control Mode

With this menu you can manually set the LEDs, control the rotation and activate the laser.
01) Press the Menu button until the display shows
02) Press the Enter button to open the menu, the display will show
03) Press the Enter button again to open the submenu:
Red intensity
Green intensity
Blue intensity
White intensity
Strobe static colors
Laser settings
Strobe Laser
Rotation direction
Rotation speed
04) Scroll with the Enter button between the options.
05) If you choose the Red, Green, Blue or White intensity, press the Up and Down buttons to set the
intensity. The adjustment range is between
06) If you choose the strobe settings from the LEDs, press the Up and Down buttons to set the strobe.
The adjustment range is between
controlled strobe.
Ordercode: 43163
.
or
.
.
.
,
.
, from slow to fast and
17
, from slow to fast.
.
,
is the sound-
.