Table of Contents
Advertisement
General safety instructions
Qualified personnel
Qualified personnel have the following qualifications:
● Training, instruction or authorization to switch on and off electric circuits and
devices/systems in compliance with safety engineering standards.
● Training or instruction in the maintenance and use of appropriate safety equipment in
compliance with safety engineering standards.
● First aid training.
Working on the door drive
Risk of injury due to dangerous electrical voltages and moving mechanical parts
Disconnect the door drive by pulling the power plug from the power supply or by clearing
(SIDOOR TRANSFORMER UL) before you start work on the door drive.
Risk of injury due to moving mechanical parts
If power-operated guards are used, ensure that they have been tested prior to initial
commissioning. Power-operated guards must also be tested annually.
Risk of injury due to moving mechanical parts
If required by the drive application, suitable protective equipment must be installed for safe
door interlocking.
ATE500E
System Manual, 09/2017, A5E33917696-AD
WARNING
WARNING
CAUTION
2
9
Advertisement
Table of Contents
