Table of Contents
Advertisement
Material
3.2
Assembly
3.2.1
Mounting overflow
Citaplex drain/overflow
The following material must be purchased separately and must be avail-
able during mounting:
odour trap
n
Proceed as follows to the mounting of the overflow:
Push the rubber sleeve onto the pipe of the overflow unit.
The lower edge must be flush with the edge of the overflow pipe.
Fit profile seal in the overflow unit.
Hold the overflow unit on the overflow opening of the bathtub from
the outside.
Screw the fixing flange into the overflow unit by hand.
Pliers or other tools may damage the fixing flange. Only turn the
fixing flange by hand.
Handling
10 from 15
Advertisement
Table of Contents
