Advertisement
Quick Links
INSTALLATION
INSTRUCTIONS
PARTS LIST
Select knob
2
Screws
TOOLS AND SUPPLIES REQUIRED
Phillips screwdriver
Torque screwdriver (T/N: CDI 401 SM)
(Available through the American Honda Tool and
Equipment Program; call 888-424-6857)
Illustration of the Select Knob Installed on the Vehicle
SELECT KNOB
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory
SELECT KNOB
P/N 08U92-TL2-210
INSTALLATION
1.
SHIFT KNOB
Move to the S position.
2.
7103010T
BII 44993 (1011)
Application
2011 TSX
Remove the cover and insert the key into the
opening, push on the key, and move the shift lever to
the S position.
Lower the shift boot by pushing the two tabs in the
positions shown.
TABS
(Push.)
SHIFT BOOT
Publications No.
BII 44993
Issue Date
NOV 2010
KEY
COVER
7103020T
7103030T
1 of 3
08U92-TL2-2000-91
Advertisement
Related Manuals for Acura 08U92-TL2-210
Summary of Contents for Acura 08U92-TL2-210
-
Page 1: Installation Instructions
Publications No. BII 44993 INSTALLATION SELECT KNOB 2011 TSX Issue Date INSTRUCTIONS P/N 08U92-TL2-210 NOV 2010 PARTS LIST INSTALLATION Select knob Remove the cover and insert the key into the opening, push on the key, and move the shift lever to the S position. - Page 2 Pry out on the shift switch cover and remove the Install the select knob using the two new screws. cover. Using a Torque screwdriver, torque the screws to 1.57 N m (14 lb-in) Do not overtighten the screws. TABS SELECT KNOB TORQUE SCREWDRIVER...
- Page 3 Pull up the shift boot to seat it in its normal position. TABS SHIFT BOOT Pull up. SHIFT BOOT 7103070T USE AND CARE • Use a sponge or cloth and a solution of mild liquid dishwashing soap and water to clean the select knob, then dry it with a shop towel.
Need help?
Do you have a question about the 08U92-TL2-210 and is the answer not in the manual?
Questions and answers