Advertisement
Step 1 – Find Mount Location
• Determine location of where the standing binder holder will be placed.
• Typically these are placed next to a shelf.
Step 2 – Mount to Floor
• Press the assembly firmly against the floor.
• Mount through the base of the assembly into the floor of the van using a self drilling screw
(4). Plae a spacer (5) under assembly if needed to give a flat, rigid mounting surface.
• Ensure safety prior to mounting into floor.
Step 3 – Mount to Shelf
• Use the assembly as a template. Press firmly against the shelf. Drill through the assembly into
the side of the shelf.
• Mount assembly (A) the side of a shelf using a 1/4" x 1" HH bolt, two 1/4" flat washers and a
1/4" nyloc.
GO BACK AND ENSURE ALL HARDWARE IS TIGHT
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Your installation is now complete.
Installation Instructions – 40280
Page 4
Advertisement
