914-Ex Ethernet Port Configuration; Figure 6-22: 914-Ex Ethernet Port Configuration; Figure 6-23: 914-Ex Ethernet Port Link Status - Moog FOCAL 914-HDE L1 User Manual

Model 914-X Series Modular Multiplexer System User Manual

6.2.8 914-EX Ethernet Port Configuration

To alter the Ethernet port 1 settings from the GUI, click on "Ethernet Info Cu1" then "Settings" tab as shown in Figure
6-12. Press ON or OFF for the desired settings and wait for each change to take effect. Figure 6-22 shows a Console
Ethernet port 1 that has 1000 BASE-T negotiation disabled. The process to alter Ethernet port 2 settings is the
same, but in the "Ethernet info Cu2" GUI section.

Figure 6-22: 914-EX Ethernet Port Configuration

Current Ethernet port link status is shown in the GUI in the "Status" tab as shown in Figure 6-23.

Figure 6-23: 914-EX Ethernet Port Link Status

Focal Technologies Corporation Page 6-17
Document Number: 914-0601-00 Rev. 5.0
A Moog Inc. Company