914-Ex Part Numbers; Table 13-9: 914-Ex Part Numbers; Table 13-10: 914-Ex Included Accessories; Table 13-11: 914-Ex Factory Configuration Options - Moog FOCAL 914-HDE L1 User Manual

13.3

914-EX Part Numbers

Part Number
914-0040-00-CYZZ*
914-0040-01-CYZZ*
* Refer to Table 13-11
** PT6K refers to Pressure Tolerant Assembly rated to 6000 PSI
Quantity Description
RS-232 Diagnostic cable, 6", pigtailed
1
#2-56, 3/16", 21/32" tall standoff
4
Remote Console
Blank
C100
C001 C101
C002 C102
C003 C103
C004 C104
C005 C105
C010 C110
C011 C111
C012 C112
C013 C113
C014 C114
C015 C115
Notes:
1. Factory configuration options represent "as shipped" settings.
2. Users may alter all configurations via 914-HDE Diagnostic GUI in combination with DIP switches.
3. Default configuration is recommended for spare assemblies
4. SW1 is always set to [OFF, OFF] for expansion channel 1. Ensure systems with multiple expansion cards
have unique channel settings.
5. Other factory settings are possible, contact Moog Focal for more options.
6. Configurations other than the default are subject to a surcharge.
Focal Technologies Corporation
A Moog Inc. Company
Model 914-X Series Modular Multiplexer System User Manual

Table 13-9: 914-EX Part Numbers

Table 13-10: 914-EX Included Accessories

Table 13-11: 914-EX Factory Configuration Options

Ethernet Port 1 Setting
10/100/1000 BASE-T(X)
10/100/1000 BASE-T(X)
10/100/1000 BASE-T(X)
100 BASE-TX
100 BASE-TX
10/100/1000 BASE-T(X)
10/100/1000 BASE-T(X)
10/100/1000 BASE-T(X)
100 BASE-TX
100 BASE-TX
Description
Standard 914-EX
914-EX PT6K**
Ethernet Port 2 Setting
100 BASE-TX
10 BASE-T
10 BASE-T
10 BASE-T
100 BASE-TX
10 BASE-T
10 BASE-T
10 BASE-T
Document Number: 914-0601-00 Rev. 5.0
Link Fault
Passthrough
Disabled
Enabled
Page 13-5