Moog FOCAL 914-HDE L1 User Manual
  1. Manuals
  2. Brands
  3. Moog Manuals
  4. Multiplexer
  5. FOCAL 914-HDE L1
  6. User manual
Moog FOCAL 914-HDE L1 User Manual

Moog FOCAL 914-HDE L1 User Manual

Modular multiplexer system, 914-x series
Hide thumbs
Table of Contents

Advertisement

Quick Links

MOOG PROPRIETARY AND CONFIDENTIAL INFORMATION
THIS TECHNICAL DATA/DRAWING/DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO, AND IS THE EXPRESS PROPERTY OF MOOG
INC., OR MOOG INC. SUBSIDIARIES EXCEPT AS EXPRESSLY GRANTED BY CONTRACT OR BY OPERATION OF LAW AND IS RESTRICTED TO USE BY
ONLY MOOG EMPLOYEES AND OTHER PERSONS AUTHORIZED IN WRITING BY MOOG OR AS EXPRESSLY GRANTED BY CONTRACT OR BY
OPERATION OF LAW. NO PORTION OF THIS DATA/DRAWING/DOCUMENT SHALL BE REPRODUCED OR DISCLOSED OR COPIED OR FURNISHED IN
WHOLE OR IN PART TO OTHERS OR USED BY OTHERS FOR ANY PURPOSE WHATSOEVER EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY
MOOG INC. OR MOOG INC. SUBSIDIARY.
Model 914-X Series
Modular Multiplexer System
User Manual
Focal Technologies Corporation
A Moog Inc. Company
77 Frazee Avenue
Dartmouth, Nova Scotia, Canada B3B 1Z4
Tel: (902) 468-2263 | www.moog.com/focal
Document No.:
914-0601-00
Revision:
5.0
Author(s):
E. Mullaley
Date of Issue:
2018-09-12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FOCAL 914-HDE L1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Moog FOCAL 914-HDE L1

Summary of Contents for Moog FOCAL 914-HDE L1

  • Page 1 THIS TECHNICAL DATA/DRAWING/DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO, AND IS THE EXPRESS PROPERTY OF MOOG INC., OR MOOG INC. SUBSIDIARIES EXCEPT AS EXPRESSLY GRANTED BY CONTRACT OR BY OPERATION OF LAW AND IS RESTRICTED TO USE BY ONLY MOOG EMPLOYEES AND OTHER PERSONS AUTHORIZED IN WRITING BY MOOG OR AS EXPRESSLY GRANTED BY CONTRACT OR BY OPERATION OF LAW.
  • Page 2 AX Expansion Card  HDV2 Media Converter Rev 5.0 2018-09-12  Optical Cards  Ribbon Cable  SFPs  Part Numbers  Dimensions  Stacking Instructions Focal Technologies Corporation Page ii Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...
  • Page 3 914-2018-00 Model 914-HDV2 Configuration Drawing 914-2020-00 Model 914-VDX Configuration Drawing 914-2022-00 Model 914-EX Configuration Drawing 914-2023-00 Model 914-AX Configuration Drawing 700-0271-00 AIB Plug-in Module User Guide Focal Technologies Corporation Page iii Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 4: Table Of Contents

    6.1.7 914-VDX Configuration ........................6-6 6.1.8 914-VDX Serial Port Configuration ..................... 6-7 6.1.9 914-VDX Diagnostics .......................... 6-8 914-EX ............................... 6-9 6.2.1 914-EX Ethernet Ports ........................6-10 Focal Technologies Corporation Page iv Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...
  • Page 5 914-CWDM-4R1 ............................8-1 914-CWDM-8R ............................8-1 914-SPLIT ..............................8-1 914-FOS ..............................8-1 Moog Focal Optical Transceivers ......................9-1 10.0 914-X Series System Installation and Operation ................... 10-1 10.1 Installation ..............................10-1 10.2 Card Stacking ............................10-2 10.3 914-X Series Expansion Interface Ribbon Cables .................. 10-3 10.4 914-X Series Bench Test .........................
  • Page 6 13.9 SFP Optical Transceiver Part Numbers ....................13-11 13.10 914-X Series High Speed Ribbon Cable Part Numbers ................ 13-13 14.0 Troubleshooting ............................14-1 14.1 Moog Focal Technical Support Contact Information ................14-4 Focal Technologies Corporation Page vi Document Number: 914-0601-00 Rev. 5.0...
  • Page 7 Table 13-2: 914-HDE Included Accessories ......................13-1 Table 13-3: 914-HDE CWDM Options........................13-2 Table 13-4: 914-HDE Factory Versions........................ 13-2 Table 13-5: 914-HDE Factory Configurations ...................... 13-3 Focal Technologies Corporation Page vii Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...
  • Page 8 Table 13-23: 914 Pressure Tolerant Optical SFP Part Numbers ............... 13-12 Table 13-24: 914-X Series High Speed Ribbon Cable Part Numbers ............... 13-13 Table 13-25: 914-X Series High Speed Ribbon Cable Included Accessories............ 13-13 Focal Technologies Corporation Page viii Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...
  • Page 9 Figure 6-26: 914-AX with AIB-232 Module (example) ..................6-19 Figure 6-27: AIB Module Orientation ........................6-20 Figure 6-28: 914-AX WAGO Connector ....................... 6-21 Figure 6-29: 914-AX Diagnostic LEDs ........................6-22 Focal Technologies Corporation Page ix Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...
  • Page 10 Figure 10-12: 914-AX Dimensions ........................10-9 Figure 10-13: 914-HDV2 Dimensions......................... 10-10 Figure 11-1: Firmware Update GUI ........................11-1 Figure 12-1: Feature Update Via Configuration Tool ................... 12-1 Focal Technologies Corporation Page x Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...
  • Page 11 Small Form-factor Pluggable (Optical Transceiver) Surface Mount Technology Time Division Multiplexer / Multiplexing Transistor-Transistor Logic Composite Video, Serial Data, EXpansion VOAT Variable Optical Attenuator Wavelength Division Multiplexer / Multiplexing Focal Technologies Corporation Page xi Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 12: Introduction

    Figure 1-2: 914-X Series System with Stacked Figure 1-1: 914-X Series HDE Motherboard Expansion Cards Figure 1-3: 914-X Series System with Tethered Expansion Cards Focal Technologies Corporation Page 1-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 13: Model 914-X Series Benefits

    Full bandwidth real time video, no compression, no compromises  Latency for all signals is measured in micro-seconds  Simple integration of complex systems with user friendly instructions, Moog Focal direct support when required  Custom OEM options available System Accessories and Options Included: ...

  • Page 14: Safety Precautions

    Do not look into the end of a fiber when it is plugged into a transceiver or active fiber, especially when using a magnifying instrument, such as a fiber microscope. Handle optical fiber with extreme care. Glass fiber is subject to breakage if mishandled. Focal Technologies Corporation Page 1-3 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 15: Setup Check List

    Section 10.0. 10. Verify and monitor the FPGA and SFP temperatures and voltages during operation using the 914 Diagnostic GUI. All values should remain in green. Focal Technologies Corporation Page 2-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 16: System Overview

    1x Isolated Via 914-HDE 1x LS w/914-AIB RS232 or MS900 w/914-AIB installed on RS485 or ARCnet 914-AX RS422 Hydrophone CAN bus 914-DX Via 914-HDE 1x LS RS232/485/422 Focal Technologies Corporation Page 3-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 17: Defining A 914-X Series System

    Note that the HD video source (e.g. from an HD camera) is connected at the remote end. The HD video output is provided at the console end (e.g. to an HD monitor). Focal Technologies Corporation Page 3-2 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 18: Figure 3-2: 914-X Series System With Expansion Cards

    For larger systems requiring more optical bandwidth than a single 914-X Series stack can provide, Moog Focal has a series of CWDM products that allow many optical data streams to be combined onto a single fiber. These cards can handle the addition of 2, 4, 6, 8 or more systems onto a single fiber.

  • Page 19: Figure 3-4: 914-X Series System With 914-Hdv2 And Cwdm

    HD Video, Ethernet HD Video, Ethernet Ethernet Ethernet and Serial and Serial Motherboard Motherboard HD Video HD Video Figure 3-4: 914-X Series System with 914-HDV2 and CWDM Focal Technologies Corporation Page 3-4 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 20: System Specification

    This allows customers who do not require expansion cards, 3G-SDI, or gigabit Ethernet to specify a more cost effective solution. Moog Focal can work with customers to configure a complete optical multiplexer solution, and the following section shows signal bandwidths and sample system configurations.

  • Page 21: Example 914-X Series L1 System

    Medium speed Gigabit Ethernet Available 914-DX 12 x Serial channels (6 per card) Low speed 914-VDX Analog video Medium speed Serial 914-EX Fast Ethernet channels Medium speed Focal Technologies Corporation Page 3-6 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 22: Example 914-X Series H1 System

    For systems requiring more than a single 914-X Series stack with a single fiber bi-directional transceiver, an optical CWDM card may be used to combine more signals onto the same fiber. Please refer to section 8.0 for more details. Focal Technologies Corporation Page 3-7 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 23: 914-Hde Motherboard Overview

    Depending on system requirements, different 914-HDE versions may be ordered. Each version supports different optical bandwidths and expansion cards. Version upgrades are possible, please contact Moog Focal for availability. For more information regarding the expansion cards, system bandwidth capabilities, and system configurations, please consult sections 6.0 and 3.3.

  • Page 24: 914-Hde Power

    The onboard surface mount fuse, F1, is rated to 2A and is not intended to be field replaceable. If the power fuse is blown, the card should be evaluated for damage by the factory or trained service personnel prior to any repair. Focal Technologies Corporation Page 4-2 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 25: 914-Hde Hd Video Channel

    50 s, not including fiber delays of 5 ns/m. Figure 4-3: Mini SMB Jack - Amphenol P/N 142146-75 Figure 4-4: Video Channel 1 Connector Location Focal Technologies Corporation Page 4-3 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 26: 914-Hde Serial Data Ports

    RX 422+ RX 422- DO NOT CONNECT RS485+ TX 422+ RS232-TX RS485- TX 422- Figure 4-5: Molex Micro-fit P/N 43045-0800 Figure 4-6: Serial Ports 1 and 2 Focal Technologies Corporation Page 4-4 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 27: 914-Hde Ethernet Port

    # Bytes * 0.008 s FT (Frame Time) 5 s / km 5 s / km 5 s / km OL (Optical Latency) Latency = FEL + FT + OL Focal Technologies Corporation Page 4-5 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 28: 914-Hde Diagnostic Leds

    Flashing LED indicates serial channel 2 is transmitting to external equipment. Yellow Flashing LED indicates serial channel 2 is receiving from external equipment. Figure 4-8: Diagnostic LEDs Focal Technologies Corporation Page 4-6 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 29: 914-Hde Diagnostic Led Header

    Flashing LED indicates serial channel 2 receive activity. Active low. SER2 TX Flashing LED indicates serial channel 2 transmit activity. Active low. Ground Figure 4-10: Diagnostic LED Header Focal Technologies Corporation Page 4-7 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 30: 914-Hde Optics

    Due to the high data rates, singlemode fiber is standard. Multimode fiber is only suitable for very short links (< 300m). Contact Moog Focal for multimode options. Typical link budgets for single mode fiber are 20dB for bi- directional single fiber or 24dB for dual fiber CWDM. Moog Focal has compatible CWDM modules that can be mounted and stacked with 914-HDE systems.

  • Page 31: Model 914-X Series Diagnostic Gui

    Extra cables provide firmware update access for individual cards. Figure 5-2: 914-HDE Diagnostic Interface Cable Focal Technologies Corporation Page 5-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 32: Table 5-1: J8 Diagnostic Connector Pinout

    RS-232 Tx (Data from 914-HDE to PC GUI) White RS-232 Rx (Data from PC GUI) Table 5-2: Diagnostic Connector Part Numbers Part Number Connector Molex 0781710003 Mating Plug Molex 0781720003 Focal Technologies Corporation Page 5-2 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 33: Installing The Model 914-X Series Diagnostic Gui

    Model 914-X Series Modular Multiplexer System User Manual Installing the Model 914-X Series Diagnostic GUI Check for the latest software release on the Moog Focal website: http://www.moog.com/focal/914-x-series search for 914-0401-00. Install the software on a computer with Microsoft Windows 7 (or newer Microsoft OS) and a serial (COM) port connected to the 914-HDE diagnostic port.

  • Page 34: Figure 5-5: 914-Hde Card Info

    When the link is established, click on the “Model 914 – Console” and “Model 914 Remote” text to pull up a list of card features, including the card info as displayed in Figure 5-5. Figure 5-5: 914-HDE Card Info Focal Technologies Corporation Page 5-4 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 35: 914-Hde Diagnostic Status Display

    Red backgrounds indicate potential problems that need to be addressed. Yellow backgrounds give warnings. Figure 5-6: 914-HDE Voltage and Junction Temperature Information Focal Technologies Corporation Page 5-5 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 36: Figure 5-7: 914-Hde Optical Link Status

    Figure 5-7 shows the optical link status, including information provided by the optical transceiver, such as transmit and receive optical power and transceiver temperature. Figure 5-7: 914-HDE Optical Link Status Focal Technologies Corporation Page 5-6 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 37: Figure 5-8: 914-Hde Signal Status

    Figure 5-8 shows the current status of each input / output signal (video, serial and Ethernet). Receive serial activity is shown in yellow to match the LEDs on the 914-HDE. Figure 5-8: 914-HDE Signal Status Focal Technologies Corporation Page 5-7 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 38: 914-Hde Serial Port Configuration

    Typical Settings: (Refer to Section 4.4)  RS-485: 1 ms timeout; terminations enabled  RS-422: terminations enabled  RS-232: No options. Figure 5-9: 914-HDE Serial Port Configuration Focal Technologies Corporation Page 5-8 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 39: 914-Hde Ethernet Port Configuration

    100M and the PC should be forced to 100M to ensure that all elements in the Ethernet link are set at the same speed. Figure 5-10: 914-HDE Ethernet Settings Focal Technologies Corporation Page 5-9 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 40: 914-X Series Expansion Cards

    The expansion connector provides for 21/32” (16.67 mm) spacing between cards when directly stacked together. For tight spaces and/or larger stacks, Moog Focal can provide high speed ribbon cables to allow cards to sit up to 18” (46 cm) apart. Please refer to Section 10.3 for more information.

  • Page 41: 914-Vdx Serial Data Ports

    DO NOT CONNECT RX 422+ RX 422- DO NOT CONNECT RS485+ TX 422+ RS232-TX RS485- TX 422- Figure 6-3: VDX Serial Ports Figure 6-2: Molex Micro-fit P/N 43045-0800 Focal Technologies Corporation Page 6-2 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 42: 914-Vdx Composite Video Channels

    25 s, not including fiber delays of 5 ns/m. Figure 6-4: Mini SMB Jack - Amphenol P/N 142146-75 Figure 6-5: Video Connector Locations Focal Technologies Corporation Page 6-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 43: 914-Vdx Power

    The onboard surface mount fuse, F1, is rated to 2A and is not intended to be field replaceable. If the power fuse is blown, the card should be evaluated for damage by the factory or trained service personnel prior to any repair. Focal Technologies Corporation Page 6-2 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 44: 914-Vdx Diagnostic Leds

    Flashing LED indicates serial channel 2 is transmitting to external equipment. Yellow Flashing LED indicates serial channel 2 is receiving from external equipment. Figure 6-7: VDX Diagnostic LEDs Focal Technologies Corporation Page 6-3 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 45: 914-Vdx Diagnostic Led Header

    Indicates that the expansion link is in a fault condition. Active low. FAULT Ground, non-isolated, connected to 914-HDE input voltage ground. Figure 6-8: Diagnostic LED Header Focal Technologies Corporation Page 6-4 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 46: 914-Vdx Expansion Channel Configuration

    ON, OFF Expansion channel 2 OFF, ON Expansion channel 3 ON, ON Expansion channel 4 Figure 6-9: Diagnostic LED Header Figure 6-10: SW1 Position and Orientation Focal Technologies Corporation Page 6-5 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 47: 914-Vdx Configuration

    914-HDE (either stacked at expansion channel 2+, or are using a high speed ribbon cable) it may be necessary to boost this from the default setting of 682 mV. This setting should never be set below 682 mV. Figure 6-11: 914-VDX Video Configuration Focal Technologies Corporation Page 6-6 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 48: 914-Vdx Serial Port Configuration

    Select new settings on a port by port basis and press apply. Each setting can take up to 10 seconds to save in non- volatile memory (EEPROM). Figure 6-12: 914-VDX Serial Port Configuration Focal Technologies Corporation Page 6-7 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 49: 914-Vdx Diagnostics

    FPGA. Any value shown in green is operating within normal specification. Values in red or yellow should be examined. Figure 6-13: 914-VDX Voltages and Temperature Focal Technologies Corporation Page 6-8 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 50: Figure 6-14: 914-Ex

    Ethernet port. Care must be taken to ensure the 914-HDE motherboard optical interface has sufficient bandwidth to support the Ethernet traffic. Actual bandwidth requirements are based on the external devices connected to the Ethernet ports. Figure 6-14: 914-EX Focal Technologies Corporation Page 6-9 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 51: 914-Ex Ethernet Ports

    # Bytes * 0.008 s FT (Frame Time) 5 s / km 5 s / km 5 s / km OL (Optical Latency) Latency = FEL + FT + OL Focal Technologies Corporation Page 6-10 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 52: 914-Ex Ethernet Rj45 Leds

    OFF* 10 BASE-T ORANGE 100 BASE-TX GREEN 1000 BASE-T LINKED FLASHING LINKED WITH ACTIVITY * Speed indication only valid when link LED is on or flashing. Focal Technologies Corporation Page 6-11 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 53: 914-Ex Power

    The onboard surface mount fuse, F1, is rated to 2A and is not intended to be field replaceable. If the power fuse is blown, the card should be evaluated for damage by the factory or trained service personnel prior to any repair. Focal Technologies Corporation Page 6-12 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 54: 914-Ex Diagnostic Leds

    Green Secondary Expansion channel link. Valid link established to partner card via 914-HDE across the optical link. Figure 6-17: 914-EX Diagnostic LEDs Focal Technologies Corporation Page 6-13 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 55: 914-Ex Diagnostic Led Header

    Activity present on Ethernet port 2. Active low. ETHERNET PORT 2 LINK Ethernet port 2 is linked. Active low. Ground, non-isolated, connected to 914-HDE input voltage ground. Figure 6-18: Diagnostic LED Header Focal Technologies Corporation Page 6-14 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 56: 914-Ex Expansion Channel Configuration

    ON, OFF Expansion channel 2 OFF, ON Expansion channel 3 ON, ON Expansion channel 4 Figure 6-19: Diagnostic LED Header Figure 6-20: SW1 Position and Orientation Focal Technologies Corporation Page 6-15 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 57: 914-Ex Configuration

    914-HDE (either stacked at expansion channel 2+, or are using a high speed ribbon cable) it may be necessary to boost this from the default setting of 682 mV. This setting should never be set below 682 mV. Figure 6-21: 914-EX Location Configuration Focal Technologies Corporation Page 6-16 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 58: 914-Ex Ethernet Port Configuration

    Current Ethernet port link status is shown in the GUI in the “Status” tab as shown in Figure 6-23. Figure 6-23: 914-EX Ethernet Port Link Status Focal Technologies Corporation Page 6-17 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 59: 914-Ex Diagnostics

    FPGA. Any value shown in green is operating within normal specification. Values in red or yellow should be examined. Figure 6-24: 914-EX Voltages and Temperature Focal Technologies Corporation Page 6-18 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 60: 914-Ax Aib Module Options

    ARCNET Sonar Module 903-0252-00 903-0252-00 903-0252-01 903-0251-00 903-0244-00 903-0261-00 903-0250-00 903-0297-00 Part Number Please refer to 700-0271-00 AIB Plug-in Module User Guide for details and configurations. Focal Technologies Corporation Page 6-19 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 61: 914-Ax Aib Module Installation

    When installing an AIB module onto the 914-AX across connectors J5 and J6, always ensure the white dots on both the AIB module and the 914-AX line up for proper orientation. Figure 6-27: AIB Module Orientation Focal Technologies Corporation Page 6-20 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 62: 914-Ax Interface Connector

    20-28 AWG stranded conductors with 0.22” - 0.24” stripped ends. The clamp for each pin can be opened up by inserting either a WAGO tool or a small screwdriver in the hole immediately above the wire hole. Table 6-15: 914-AX WAGO Connector Mating Plug Focal Technologies Corporation Page 6-21 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 63: 914-Ax Diagnostic Leds

    AIB Tx data. Tx refers to transmit from the 914-AX. Yellow AIB Rx data. Rx refers to receive at the 914-AX. Figure 6-29: 914-AX Diagnostic LEDs Focal Technologies Corporation Page 6-22 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 64: 914-Ax Diagnostic Led Header

    AIB RX DATA Data is received at the AIB module. Active low. Ground, non-isolated, connected to 914-HDE input voltage ground. Figure 6-30: 914-AX Diagnostic LED Header Focal Technologies Corporation Page 6-23 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 65: 914-Ax Configuration And Diagnostics

    914-HDE will show up as channel one in the diagnostic GUI. Tx and Rx activity status may be observed via the 914-HDE diagnostics in the “Low Speed Expansion” tab. Figure 6-31: 914-AX Data Activity Focal Technologies Corporation Page 6-24 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 66: 914-Dx (Preliminary Information)

    The 914-HDE expansion connector has been designed to enable future upgrades and addition of new 914-X Series cards that can be developed in the future to support other types of electrical signals or protocols. Please contact Moog Focal to discuss other applications or custom board needs. Focal Technologies Corporation Page 6-25 Document Number: 914-0601-00 Rev.

  • Page 67: Media Converters

    CWDM module. 914-HDV2 The Moog Focal Model 914-HDV2 is a standalone media converter solution for one or two 3G/HD/SD-SDI video feeds per card. This card has the same form factor and mounting requirements as the rest of the 914-HDE series, and can have the optical signals combined with a 914-HDE system via available optical CWDM cards.

  • Page 68: 914-Hdv2 Video Connections

    914-HDV2 cards typically use dual transmitter optics at the remote end, and dual receivers at the console. Note that the channel nomenclature is inverted when switching configurations. For single channel 914-HDV2 configurations, the CH1 location (only) should be used. Focal Technologies Corporation Page 7-2 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 69: Figure 7-5: 914-Hdv2 Optical Interface

    All versions of the 914-HDV2 use high powered optical transceivers, a minimum link loss or attenuation of 10 dB is suggested. Bushings on the SFP optical transceiver are standard LC. Fiber type is singlemode. Figure 7-5: 914-HDV2 Optical Interface Focal Technologies Corporation Page 7-3 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 70: 914-Hdv2 Power

    The onboard surface mount fuse, F1, is rated to 2A and is not intended to be field replaceable. If the power fuse is blown, the card should be evaluated for damage by the factory or trained service personnel prior to any repair. Focal Technologies Corporation Page 7-4 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 71: 914-Hdv2 Configuration

    HDV2. There are hardware differences between the MSA and non-MSA boards, do not alter the switch settings without consulting Moog Focal. The exception is SW2 and SW6 EQ and CD settings. This can be tuned to the video resolution and cable lengths as required.

  • Page 72: 914-Hdv2 Diagnostic Led Header

    VID CH1 VALID Video Channel 1 output is valid. Console only. Active low. VID CH2 VALID Video Channel 2 output is valid. Console only. Active low. Ground Focal Technologies Corporation Page 7-6 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 73: 914-Hdv2 Diagnostic Leds

    Video channel 2 input valid (remote) Yellow Video channel 2 output valid (console) Green Power Fault. Outside of +4.5 V to +13.0 V range. Power Good Green Focal Technologies Corporation Page 7-7 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 74: 914-Hdv2 Diagnostics

    Access to the RS232 diagnostic interface is via connector J6. Please refer to Section 5.0 for more information regarding this connector, pinout and cabling. 914-HDV2 diagnostic GUI part number is 914-0415-00 available via the Moog Focal website. Figure 7-9: 914-HDV2 Optical Diagnostics...

  • Page 75: Figure 7-10: 914-Hdv2 Pcba Diagnostics

    Model 914-X Series Modular Multiplexer System User Manual Figure 7-10: 914-HDV2 PCBA Diagnostics Figure 7-11: 914-HDV2 Video Diagnostics Figure 7-12: 914-HDV2 LED Diagnostics Focal Technologies Corporation Page 7-9 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 76: Optical Cards

    1471 / 1491 / 1511 / 1531 / 1551 / 1571 / 1591 / 1611 nm are the eight multiplexed wavelengths (red band). 914-SPLIT The single fiber link can be split onto 2 fibers for communication and fiber redundancy. Please contact Moog Focal for details.

  • Page 77: Moog Focal Optical Transceivers

    Model 914-X Series Modular Multiplexer System User Manual Moog Focal Optical Transceivers Moog Focal OEM SFP optical transceivers are available for sparing, replacements, and upgrades. Pressure tolerant versions of the 4.25 Gbps SFPs are available. Table 9-1: SFP Optical Transceiver Options 4.25 Gbps...

  • Page 78: 914-X Series System Installation And Operation

    LC connectors in the transceiver bushings using MIL-A-46146 equivalent RTV, such as Dow Corning 3145 clear RTV. RTV may also be applied to power and data connectors, if required. Focal Technologies Corporation Page 10-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 79: Card Stacking

    Repeat step 4 for each Expansion card. 5. Complete the stack with supplied nuts and Loctite 290 (or similar) to retain the top card. Figure 10-2: 914-X Series System Stack Focal Technologies Corporation Page 10-2 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 80: 914-X Series Expansion Interface Ribbon Cables

    When specifying a large stack to fit into a small enclosure or pressure bottle, it may be desirable to break the stack into smaller pieces. This can be accomplished with Moog Focal 914-X Series expansion interface high speed ribbon cables. Specify lengths from 3” to 18” with orientations for inline mounting vs side-to-side mounting.

  • Page 81: 914-X Series Bench Test

    A spool of fiber used with the VOAT can also be used to simulate dispersion effects over long cable lengths. 5. Repeat steps 1-4 with connections reversed to verify the remote to console (uplink) optical budget. Focal Technologies Corporation Page 10-4 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 82: 914-X Series Electrical And Environmental Specifications

    All jumpers, cables, connectors, couplers, and Fiber Optic Rotary Joints (FORJs) used in the external optical system connecting the remote to console multiplexer must use the same type of fiber. Focal Technologies Corporation Page 10-5 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 83: Figure 10-6: Lc Connector

    SFP optical transceivers typically have a transmit and receive optical bushing (LC type), which requires dual fiber operation. The transmit side (Tx) and the receiver side (Rx) of a dual LC port SFP is shown in the figure below. Focal Technologies Corporation Page 10-6 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 84: 914-X Series System Product Handling

    10.8 914-X Series Accessories 914 accessory kits are available from Focal, these include mating cables for all interfaces. Please contact your local Moog Focal representative for more information including orderable part numbers. Focal Technologies Corporation Page 10-7 Document Number: 914-0601-00 Rev. 5.0...

  • Page 85: 914-X Series Dimensions

    Model 914-X Series Modular Multiplexer System User Manual 10.9 914-X Series Dimensions 10.9.1 914-HDE Figure 10-9: 914-HDE Dimensions (inches) 10.9.2 914-VDX Figure 10-10: 914-VDX Dimensions (inches) Focal Technologies Corporation Page 10-8 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 86: 914-Ex

    Model 914-X Series Modular Multiplexer System User Manual 10.9.3 914-EX. Figure 10-11: 914-EX Dimensions (inches) 10.9.4 914-AX. Figure 10-12: 914-AX Dimensions (inches) Focal Technologies Corporation Page 10-9 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 87: 914-Hdv2

    Model 914-X Series Modular Multiplexer System User Manual 10.9.5 914-HDV2 Figure 10-13: 914-HDV2 Dimensions (inches) Focal Technologies Corporation Page 10-10 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 88: Connector Part Numbers

    RG179 cabling is recommended] LED Header 20021521-00010T1LF 20021444-00010T1LF [plug compatible with most 10 wire 0.05“ spacing [10-pin; 2 row] ribbon cables] Diagnostics Molex 0781710003 0781720003 [3-pin] [3-pin plug] Focal Technologies Corporation Page 10-11 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 89: Signal Specifications

    Minimum latency is for 1000BASE-T, typical for 100BASE-TX, and maximum for 10BASE-T. ***Does not include latency through the AIB plug-in modules. Specifications for the AIB plugin modules are contained in the 700-0271-00 user guide. Focal Technologies Corporation Page 10-12 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 90: Firmware Updates

    14. Power down the 914 card (it must be power cycled to take effect). 15. Repeat for all 914 cards that require an update, linked pairs must both have the same firmware version. Figure 11-1: Firmware Update GUI Focal Technologies Corporation Page 11-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 91: Firmware Compatibility

    Table 11-1 shows compatible revisions in rows. Each row is only compatible with other products and revisions in that row. Contact Moog Focal regarding non-standard updates of older products, or for compatible expansion cards for 914- HDE Rev 2 cards.

  • Page 92: Feature Upgrades

    5. Both remote and console cards can be upgraded from the console side, there is no need to directly access the remote card, but it must be powered and have a valid optical link to receive the upgrade. Figure 12-1: Feature Update Via Configuration Tool Focal Technologies Corporation Page 12-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 93: Part Numbers

    Table 13-2: 914-HDE Included Accessories Quantity Description Power harness, 6’, pigtailed RS-232 Diagnostic cable, 6”, pigtailed #2-56, 3/16”, 21/32” tall standoff #2-56, 3/16”, 5/32” tall standoff #2-56, hex nut Focal Technologies Corporation Page 13-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 94: Table 13-3: 914-Hde Cwdm Options

     Red wavelengths are recommended, particularly 1471 to 1571 nm.  1591 and 1611 nm wavelengths are not recommended for use with the Moog Focal Optical Monitoring System (OMS).  When configuring a system, it is best to choose adjacent wavelengths and not to mix red band with blue band wavelengths.

  • Page 95: Table 13-5: 914-Hde Factory Configurations

    2. Users may alter all allowable configurations via 914-HDE Diagnostic GUI based on 914-HDE version: L1, M1 or H1. 3. Default configuration is recommended for spare assemblies. 4. Other factory settings are possible, contact Moog Focal for more options. 5. Configurations other than the default are subject to a surcharge. Focal Technologies Corporation Page 13-3 Document Number: 914-0601-00 Rev.

  • Page 96: 914-Vdx Part Numbers

    4. SW1 is always set to [OFF, OFF] for expansion channel 1. Ensure systems with multiple expansion cards have unique channel settings. 5. Other factory settings are possible, contact Moog Focal for more options. 6. Configurations other than the default are subject to a surcharge.

  • Page 97: 914-Ex Part Numbers

    4. SW1 is always set to [OFF, OFF] for expansion channel 1. Ensure systems with multiple expansion cards have unique channel settings. 5. Other factory settings are possible, contact Moog Focal for more options. 6. Configurations other than the default are subject to a surcharge.

  • Page 98: 914-Ax Part Numbers

    Provides 12 V to the hydrophone, gain is bypassed 903-0250-00 AIB-MS900 MS900 Analog Sonar Interface 903-0250-01 AIB-MS900L MS900 Analog Sonar Low Frequency Interface 903-0297-00 AIB-CANBUS CAN bus interface, up to 1 Mb/s supported Focal Technologies Corporation Page 13-6 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 99: 914-Dx Part Numbers (Preliminary)

    4. SW1 is always set to [OFF, OFF] for LS expansion channel 1. Ensure systems with multiple LS expansion cards have unique channel settings. 5. Other factory settings are possible, contact Moog Focal for more options. 6. Configurations other than the default are subject to a surcharge.

  • Page 100: 914-Hdv2 Part Numbers

    Table 13-20 * XX Refer to Table 13-20 ** PT6K refers to Pressure Tolerant Assembly rated to 6000 PSI *** Not for use with Moog Focal OMS (Optical Monitoring System) Focal Technologies Corporation Page 13-8 Document Number: 914-0601-00 Rev. 5.0...

  • Page 101: Table 13-19: 914-Hdv2 Included Accessories

    Upgrade, not for use with Moog Focal OMS Notes: 1. Other dual wavelength CWDM options are possible. Contact Moog Focal for details. 2. Single channel remote assemblies can be linked to dual channel console assemblies. This is useful in pressure tolerant systems where two 914-HDV2 PT cards can link to a single console 914-HDV2.

  • Page 102: 914-X Series Optical Card Part Numbers

    Singlemode Optical Splitter, 1x2 NSP0F 914-0017-10 914-FOS 914-FOS-SM- Singlemode Optical Switch, 2x1 NSP0F 914-0017-11 914-CWDM-4R1 914-CWDM- CWDM 4CH (1471/1491/1511/1531) SM4+N-R5-P0F 914-0017-12 914-CWDM-8R 914-CWDM- CWDM 8CH SM8+N-R7-P0F (1471/1491/1511/1531/1551/1571/1591/1611) Focal Technologies Corporation Page 13-10 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 103: Sfp Optical Transceiver Part Numbers

    4.25G; Tx 1611 nm dual fiber CWDM SFP Notes: 1. Blue wavelength CWDM SFPs are special order items. 2. Refer to Section 9.0 for SFP specification. Focal Technologies Corporation Page 13-11 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 104: Table 13-23: 914 Pressure Tolerant Optical Sfp Part Numbers

    4.25G; Tx 1611 nm; dual fiber CWDM SFP; 6000 PSI; LC Conn. Notes: 1. Pressure tolerant SFPs are special order items. 2. Refer to Section 9.0 for SFP specification. Focal Technologies Corporation Page 13-12 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 105: 914-X Series High Speed Ribbon Cable Part Numbers

    3. The length is measured connector to connector on the ribbon cable, this does not imply card-to-card spacing. 4. Other lengths are available up to 18”, please contact Moog Focal. 5. Included accessory hardware allow for the completion of one stack and the start of the next.

  • Page 106: Troubleshooting

    Dirty fiber contacts and bushings Bent or broken fibers iii. Fiber type mismatches Non-functional 914-HDE at the far side Fiber length is too long Malfunctioning Fiber Optic Rotary Joint Focal Technologies Corporation Page 14-1 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...
  • Page 107 914-HDE when 3G-SDI video is required. d. Are the firmware revisions of the cards compatible? Refer to Section 0. e. Are the card versions compatible? M1 to M1? L1 to L1? Focal Technologies Corporation Page 14-2 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...
  • Page 108 Using the 914 Diagnostic GUI, open and close tabs looking for anything ‘RED’, this indicates a problem that should be addressed. Voltage Temperature iii. Optical power Dropped Ethernet Frames Optical link problems Expansion link problems Focal Technologies Corporation Page 14-3 Document Number: 914-0601-00 Rev. 5.0 A Moog Inc. Company...

  • Page 109: Moog Focal Technical Support Contact Information

    Model 914-X Series Modular Multiplexer System User Manual 14.1 Moog Focal Technical Support Contact Information Focal Technologies Corporation A Moog Inc. Company 77 Frazee Ave. Dartmouth, Nova Scotia Canada B3B 1Z4 1-902-468-2263 focal@moog.com http://www.moog.com/focal Focal Technologies Corporation Page 14-4 Document Number: 914-0601-00 Rev. 5.0...

This manual is also suitable for:

914-hde m1914-hde h1914-vdx914-ex914-ax w/914-aib914-dx ... Show all

Table of Contents